Microchip SY88932L Bedienungsanleitung


Lies die bedienungsanleitung für Microchip SY88932L (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 12 Personen als hilfreich bewertet und erhielt im Schnitt 3.8 Sterne aus 6.5 Bewertungen. Hast du eine Frage zu Microchip SY88932L oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/6
DESCRIPTION
Up to 3.2Gbps operation
Modulation current to 60mA
50 input termination
Rise/fall times < 70ps
Programmable laser modulation voltage
Operating temperature range: –40°C to +85°C
Available in tiny 16-pin (3mm ××
××
× 3mm) MLF™ package
FEATURES
3.3V 3.2Gbps SONET/SDH
LASER DRIVER WITH 50
INPUT TERMINATION
SY88932L
EVALUATION BOARD
1
Rev.: A Amendment: /0
Issue Date: October 2002
The SY88932L 3.3V SONET laser driver is the smallest
laser driver with programmable modulation current used for
applications up to 3.2Gbps. The device accepts either PECL
or CML level data inputs. The SY88932L provides
modulation voltage/current of up to 60mA for FP (Fabry-
Perot) or DFB (Distribution Feedback) lasers. There is a
75k pull-down resistor to VEE at the input of /EN. An
active TTL enable signal shuts o the modulation current.
This document provides design and implementation
information, as well as, a detailed description of the
SY88932L evaluation board. The evaluation board is AC-
coupled, and has both dierential inputs and outputs, and
a resistor port to vary the modulation voltage.
TEST SET-UP FOR EVALUATION BOARD
Figure 1. Test Set-Up for the SY88932L Evaluation Board
MLF and
Micro
LeadFrame are trademarks of Amkor Technology, Inc.


Produktspezifikationen

Marke: Microchip
Kategorie: Nicht kategorisiert
Modell: SY88932L

Brauchst du Hilfe?

Wenn Sie Hilfe mit Microchip SY88932L benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten