Middle Atlantic SRB-2-WRK-3224 Bedienungsanleitung
Seiten 2 Nicht kategorisiert
Lies die Bedienungsanleitung für Middle Atlantic SRB-2-WRK-3224 kostenlos online oder lade das PDF herunter. Diese Anleitung wurde 0 Mal aufgerufen. Frage zu diesem Modell? Stelle eine Frage
SRB SERIES
SEISMIC CERTIFIED RISER BASES
Instruction Sheet
I-00146 Rev D
INSTALLATION
1) Secure SRB to floor using customer
supplied hardware (certified by the
professional engineer)
(FIGURE A)
2) Place enclosures on SRB. Secure them
to the riser base using seismic brackets in
4 places (see part number chart below) and
certified hardware specified by the Professional
Engineer (FIGURE A)
SEISMIC
BRACKET
SEISMIC
BRACKET
An engineered system is vital to achieve seismic rating requirements. A licensed professional
engineer must approve the type of fasteners for the flooring where the rack will be mounted.
Braced according to specifications set forth by licensed Architects and Engineers, the Middle
Atlantic Products rack you purchased is capable of sustaining a phenomenal lateral load with
the front rails filled to maximum capacity.
NOTE: When used with ANGLE, raised floors must not be fastened to ANGLE itself
SEISMIC COMPLIANCE
WARNING: A Professional Engineer must specify seismic certified mounting hardware
appropriate to the application. Failure to specify appropriate seismic certified
hardware can result in system failure, damage, and/or personal injury
3) Connect enclosures using appropriate ganging hardware. (FIGURE B)
Ganging Hardware for Racks:
GANG-10 (All Racks)
GANG-10T (BGR Racks Only)
BOND-G24 (Used for Electrical Bonding of Racks)
GANGING
HARDWARE
(FIGURE B)
Produktspezifikationen
| Marke: | Middle Atlantic |
| Kategorie: | Nicht kategorisiert |
| Modell: | SRB-2-WRK-3224 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Middle Atlantic SRB-2-WRK-3224 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten