Motorola MTIDM042611 Bedienungsanleitung

Lies die bedienungsanleitung für Motorola MTIDM042611 (3 Seiten) kostenlos online; sie gehört zur Kategorie Sicherheitskamera. Dieses Handbuch wurde von 28 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 14.5 Bewertungen. Hast du eine Frage zu Motorola MTIDM042611 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Camera

CD Drill template

Quick guide

4 Screw plastic plugs

4 Tapping screws

PA 4X25

Security cap

1Mounting base

2Ethernet connection cable

3Power connection cable

IP DOME CAMERA

IP DOME VARIFOCAL CAMERA

Camera

CD Wrench Drill template

Quick guide

4 Screw plastic plugs

4 Tapping screws

PA 4X25

Please make sure that the wall or ceiling is strong

enough to withstand 3 times the weight of the camera.

Please install and use the camera in the dry environment.

1.Loosen the lock screw to disassemble the camera from

the mounting base.

2. Drill the screw holes and the cable hole on the

mounting surface using the available drill template.

3.Fix the mounting base to the mounting surface.

4.Route the cables through the cable hole and finally

connect the cables as needed.

1Mounting base

2Dome cover

3Locking screw

4Dome

5Ethernet connection cable

6Power connection cable

IP dome camera

Quick Guide

IP dome varifocal camera

•If the product does not work properly, please contact

your dealer or the nearest service center. Never

attempt to disassemble the camera yourself. Your

warranty will be voided if any problems are caused

by unauthorized repair or maintenance.

•

•

Handle with care and prevent dropping the camera.

When the product is mounted on a wall or ceiling,

ensure that the device is properly firmly fixed.

•Prevent touching the lens of the camera.

•

•

If cleaning is necessary, please use a clean cloth to

wipe it gently. If the device will not be used for a long

time, please cover the lens cap to protect the device

from dust.

Prevent aiming the camera directly to the sun or to

very bright environments.

•Do not place the camera in extremhot or coldely

environments (operating temperature is -20˚C~50˚C),

dusty or damp locations.

•Para evitar exceso de calentamiento To avoid increase

in heat of product, good ventilation is required.•It is recommended to install the security cap for

outdoor installation.

•The 12 VDC power supply is not required if a PoE

network connection is used to power the camera, ..

Connecting the ethernet network cable

1.Loosen the cap nut from the main part.

2.Run the network cable (without RJ45 connector)

through the both parts. Then crimp the cable with

RJ45 connector.

3.Screw back and tighten cap to create a hermetic seal.

Quick Guide

•Please, read carefully these instructions before

operating your camera and save this as reference.

•All examples and images used in this guide are only

for reference.

•The content of this guide is subject to changes

without previous notice.

1. Precautions

2. Contents

3.Product overview

4. Installation

Produktspezifikationen