Motorola MTIDP042611 Bedienungsanleitung

Lies die bedienungsanleitung für Motorola MTIDP042611 (2 Seiten) kostenlos online; sie gehört zur Kategorie Sicherheitskamera. Dieses Handbuch wurde von 28 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 14.5 Bewertungen. Hast du eine Frage zu Motorola MTIDP042611 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

•It is recommended to install the security cap for

outdoor installation.

•The 12 VDC power supply is not required if a PoE

network connection is used to power the camera.

2. Contents

3.General Info

1Network cable

2Power

Camera

2. Rotate the dome body to the left in order to

remove the dome from the base.

3. Screw in base in position using the drill template

and test the location of the dome body before

tightening screws.

IP Dome Camera

Quick Guide

A

ceilin g as ind ica ted for ach iev ing better hea t

It is stron gly rec om men ded to cu t the hole (A)

diss ipa tion e ffect.

in the

2

1

12 Vcc

Security plug

A

I

c

t i

eil

s s

in

tr

g a

on

s i

gl

n

y r

di

e

c

c

at

o

e

m

d f

m

o

en

r a

d

c

e

hi

d t

ev

o c

in

u

g b

t th

ett

e h

e

o

r h

l

e

e (

a

A

t

dis sipat ion effe ct.

) in th e

Ø 52mm

.

.

.

..

Ø 70mm

Ø 8.5mm

48.50 mm

•If the product does not work properly, please contact

your dealer or the nearest service center. Never

attempt to disassemble the camera yourself. Your

warranty will be voided if any problems are caused

by unauthorized repair or maintenance.

•

•

Handle with care and prevent dropping the camera.

When the product is mounted on a wall or ceiling,

ensure that the device is properly firmly fixed.

•Prevent touching the lens of the camera.

•

•

If cleaning is necessary, please use a clean cloth to

wipe it gently. If the device will not be used for a long

time, please cover the lens cap to protect the device

from dust.

Prevent aiming the camera directly to the sun or to

very bright environments.

•Do not place the camera in extremhot or coldely

environments (operating temperature is -20˚C~50˚C),

dusty or damp locations.

•Para evitar exceso de calentamiento To avoid increase

in heat of product, good ventilation is required.

•Please, read carefully these instructions before

operating your camera and save this as reference.

•All examples and images used in this guide are only

for reference.

•The content of this guide is subject to changes

without previous notice.

1. Precautions

CameraQuick guide4 Tapping screws

PA 4X25

CD Drill template4 Screw plastic plugs

Connecting the network cable

1.Remove the connector cap by unscrewing it.

2.Run a network cable through the two caps parts and

install RJ45 connector to cable and connect both

cables together .

3.Screw together the cap parts and then screw cap to

the camera network connector cable .

4. Installation

Please make sure that the wall or ceiling is strong enough to

withstand 3 times the weight of the camera. Please install

and use the camera in the dry environment.

1. Drill the screw holes and the cable hole on the

mounting surface using the available drill template.

Produktspezifikationen