Mount-It! MI-14010 Bedienungsanleitung


Lies die bedienungsanleitung für Mount-It! MI-14010 (7 Seiten) kostenlos online; sie gehört zur Kategorie Unterstützung für Flachbildschirme. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 12 Bewertungen. Hast du eine Frage zu Mount-It! MI-14010 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/7
HEAVY-DUTY FULL-MOTION
TV WALL MOUNT
MI-14010
Scan this QR code for
product information, videos,
and assembly assistance.
Thank you for choosing Mount-It
2
Mount-It!
Mount-It!
Mount and Accessories
4
• Use a stud nder to locate the center of the studs and hold the Template (#E) to the wall in the desired
mounting location.
• Use a Bubble Level (#D) to ensure that the mount is level.
• Mark the center of the studs through the Template as shown.
• Drill holes in the marked locations using a 1/4” drill bit (6mm) to a depth of 3.5” (90mm)
• Hold the Wall Mount (#A) to the wall over the holes, check the level once again, and install the 4 Lag
Screws (#W-A) and Washers (#W-C) then tighten until secure.
Wood Stud Installation Option
Step 1a Step 1b


Produktspezifikationen

Marke: Mount-It!
Kategorie: Unterstützung für Flachbildschirme
Modell: MI-14010

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mount-It! MI-14010 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten