Mount-It! MI-SB50 Bedienungsanleitung


Lies die bedienungsanleitung für Mount-It! MI-SB50 (7 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2 Bewertungen. Hast du eine Frage zu Mount-It! MI-SB50 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/7
UNIVERSAL SOUNDBAR BRACKETS
FOR TV AND WALL MOUNTING
MI-SB50
Thank you for choosing Mount-It
2
Mount-It!
Mount-It!
15kg
( 33 lbs)
4
Begin by removing the backing from two of the Long Adhesive Pads (E) and installing them as shown
onto the Soundbar Bracket (B).Slide Decorative Cover (C) onto the shorter end of the Soundbar Bracket
(B). Next remove the backing from 4 of the Short Adhesive Pads (D) and install them as shown. Repeat
this step for the second Soundbar Bracket (B).
Locate the center of the studs with a stud finder,
then using a bubble level to ensure straightness
mark the center of the two bolt holes on the
Soundbar Brackets (B). Drill the mounting hole
using a 1/8 drill bit and drill to a depth of 1.6.
Choose the desired location on your wall and
using a bubble level to ensure straightness mark
the center of the two bolt holes on the Soundbar
Brackets. Drill the mounting hole using a 9/32
drill bit and drill to a depth of 1.6.
Installing Pads and Cover
Mounting the Soundbar Directly to the Wall
Drilling Mounting Holes
Stud Mounting Option
Concrete Mounting Option
Step 1a
Step 2a


Produktspezifikationen

Marke: Mount-It!
Kategorie: Nicht kategorisiert
Modell: MI-SB50

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mount-It! MI-SB50 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten