MuxLab VideoEase MonoPro XLR Bedienungsanleitung

Lies die bedienungsanleitung für MuxLab VideoEase MonoPro XLR (2 Seiten) kostenlos online; sie gehört zur Kategorie AV extender. Dieses Handbuch wurde von 56 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 28.5 Bewertungen. Hast du eine Frage zu MuxLab VideoEase MonoPro XLR oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Specifications

SpecificationsAnalog AudioDigital Audio

Environment

Balanced line level or microphone

analog audio

Balanced line level digital audio

Signal Amplitude

2.3 Vp-p2 – 7Vp-p

Polarity Sensitive

Phase polarity sensitiveNot polarity sensitive

Impedance

Output: 600 Ω Input: 600-20kΩ110 Ω

Signal type

Professional balanced analog line level

or microphone

Professional balanced digital line level

Maximum Distance via Cat5

UTP

Line level: 5,000 ft (1.5 km)

Passive Mic level: 3,000 ft (914m)*

* Active microphone supported.

Requires ground pin connected at both

ends. Distance unspecified.

Sampling Rate Distance

32 kHz 1,400ft (426m)

44.1 kHz 1,300ft (396m)

48 kHz 1,250ft (381m)

96 kHz unspecified

Frequency response

DC to 6 MHz

Pro Audio Devices

mixers, routers, switchers, format converters, splitters, distribution amplifiers,

boosters, receivers, encoders, CD players, DAT recorders, microphone pre-amps,

compressors, passive microphones, equalizers, active loudspeakers, public address

systems, rental and staging equipment.

Transmission

Transparent to the user.

Insertion Loss (per pair)

Less than 1 dB /pair from DC to 6 MHz

Return Loss

Less than 15dB from DC to 6 MHz

Common Mode Rejection

(CMMR)

Greater than 45 dB

Cable – UTP

24 gauge or lower solid copper twisted pair wire impedance: 100 Ω at 1 MHz.

Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000 ft at 1 MHz

Connectors

XLR3-M or XLR3-F depending on model

Two (2) screw terminals for signal

One (1) screw terminal for optional shield (ground)

Pin Configuration

XLR3 Signal UTP

Pin 1 Shield Gnd (optional)

Pin 2 Positive Tip [T]

Pin 3 Return Ring [R]

Cable Strain Relief

Threaded and tapered cable grip mechanism.

Temperature

Operating: 0° to 55° C. Storage:-20° to 85°C. Humidity: 95% non-condensing

Enclosure

Fire retardant plastic. UL94-V0

Dimensions

1.875” x 1” diameter (4.76 cm x 2.54 cm diameter) plus 5” (12.7cm) XLR3

lead

Weight

2.64 oz (75 gms)

Standards

AES/EBU 1982, AES-1992, ANSI S.40-1992, IEC-958

Regulatory

FCC, CE.

Warranty

Lifetime

Order Information

500025 MonoPro XLR, XLR3-M

500026 MonoPro XLR, XLR3-F

5450 Cote de Liesse, Montreal,

Quebec, Canada, H4P 1A5

Tel.: +1 (514) 905-0588 Fax: +1 (514) 905-0589

Toll Free (North America): (877) 689-5228

E-mail: [email protected] URL: www.muxlab.com

94-000343-B SE-000572-B

VideoEase MonoPro™ XLR

(500025, 500026)

Installation Guide

Introduction

The MonoPro™ XLR (500025, 500026) allows a standard AES analog or digital

audio channel to be connected via Cat5 unshielded twisted pair cable (UTP) in the

professional audio environment. The product features heavy duty cable strain relief

for rugged environments such as rental and staging and is available with male or

female locking XLR3 connectors for added cabling versatility.

Installation

To install the MonoPro XLR, perform the following steps:

1.The MonoPro™ XLR works in pairs. Depending on the number of audio

signals to be transmitted, use one pair of MonoPro XLR adapters for each

audio signal. For example; mono audio – two (2) adapters, stereo audio - four

(4) adapters, etc.

2.Identify the pin configuration of the adapter. One twisted pair is required for

each audio connection with an optional connection for shield. MonoPro™ XLR

is polarity sensitive. Therefore, please ensure straight-through polarity.

3.Remove the adapter cover by inserting a screwdriver at the lower edge of the

cover.

Produktspezifikationen