NAKS SF9-ECM Bedienungsanleitung

Lies die bedienungsanleitung für NAKS SF9-ECM (7 Seiten) kostenlos online; sie gehört zur Kategorie Dunstabzugshaube. Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 3 Bewertungen. Hast du eine Frage zu NAKS SF9-ECM oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

DIRECT DRIVE

SUPPLY FANS

OPERATION INSTRUCTIONS AND PARTS MANUAL

MODELS: SF5-ECM, SD7-ECM, SF8-ECM, SF9-ECM

GENERAL SAFETY

Rotating parts, (pulleys, shafts and belts) on fans should not be exposed. Where these components are not protected by ductwork, cabinets

or covers, appropriate guards should be employed to restrict exposure to rotating parts. Access doors should not be opened with the fan

operating to avoid foreign objects being drawn into the system. On initial start-up, a careful inspection should be carried out to ensure no

foreign material is present which could become airborne in the system.

Read installation and operation instructions carefully before attempting to install, operate or service NAKS SF Series Blowers. Failure to

comply with instructions could result in personal injury and/or property damage. Retain instructions for future reference.

BEFORE YOU BEGIN

Inspect unit for damage, report any shipping damage to carrier. Check all fasteners, re-tighten as required. Rotate the blower wheel by

hand to ensure free rotation. If rubbing occurs, loosen the set screw(s), re-position the wheel to the shaft center, re-tighten set screws.

INSTALLATION

Remove hood and filters from inside the cabinet. Caulk top of curb before setting unit in place. (Curb must be smaller than unit “A”

dimension). Secure unit to curb through holes located around the bottom of the unit. Tighten wheel set screw.

A

A

F

E

F

G

D

H

BOTTOM VIEW

SIZEQUANTITY

SF5-ECM22"24"10 1/4"11 7/8"5"3 7/8"7 7/8"16"18 1/8"19 7/8"16" x 25" x 1"121 7/8" x 21 7/8"TBA

SF7-ECM22"24"11 7/8"13 1/4"4 7/16"3 1/4"6 7/8"16"18 1/8"19 7/8"16" x 25" x 1"121 7/8" x 21 7/8"TBA

SF8-ECM

SF9-ECM

32"32"13 3/4"15 7/8"8 1/16"4 1/4"14"25"24 5/8"25"16" x 25" x 1"231 7/8" x 31 7/8"TBA

*INSIDE

CABINET

UNIT WEIGHTS (LBS)

(without motors & drives)

GHLMZ

FILTERS

MODELABDEF

2017Page 1 of 4

AA

B

Z

L

REMOVE CAP FOR

FILTER ACCESS

2"

Ø5/16" HOLES

FOR FASTENING

TO CURB

M

*Curb size to be smaller than inside cabinet to allow for flashing and roofing.

**Includes filter section

Produktspezifikationen