NEC SP-RM3 Bedienungsanleitung
NEC
Nicht kategorisiert
SP-RM3
Lies die bedienungsanleitung für NEC SP-RM3 (14 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu NEC SP-RM3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/14
User's Manual
Rear mounted speakers
SP-RM3
SP-RM3a
March 1, 2021
Revision 1.0
Sharp NEC Display Solutions
Contents
▪ "Important monitor information" on page 2
▪ "Box contents" on page 4
▪ "Mounting the speakers" on page 5
▪ "Connecting the cables" on page 7
▪ "Safety precautions, maintenance, and troubleshooting" on page 11
▪ "Manufacturer’s Recycling" on page 14
English−2
Important monitor information
WARNING: To prevent re or shock hazards, do not expose this unit to rain or moisture.
Do not connect or disconnect this product during an electrical storm.
Also, do not use this unit’s polarized plug with an extension cord receptacle or other outlets unless the prongs
can be fully inserted.
Refrain from opening the cabinet as there are high voltage components inside. Refer servicing to qualied
service personal.
CAUTION: To reduce the risk of electric shock, make sure the power cord is unplugged from the wall socket.
To fully disengage the power to the unit, please disconnect the power cord from the AC outlet.
Do not remove cover (or back). No user serviceable parts inside.
Refer servicing to qualied service personnel.
Please use the power cord provided with this display in accordance with the power cord table. If a power cord
is not supplied with this equipment, please contact Sharp NEC Display Solutions, Ltd. For all other cases,
please use the power cord with the plug style that matches the power socket where the monitor is located.
The compatible power cord corresponds to the AC voltage of the power outlet and has been approved by, and
complies with, the safety standards in the country of purchase.
This equipment is designed to be used in the condition of the power cord connected to the earth. If the power
cord is not connected to the earth, it may cause electric shock. Please make sure the power cord is earthed
properly.
This symbol warns user that uninsulated voltage within the unit may have sucient magnitude to cause electric
shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been
included. Therefore, it should be read carefully in order to avoid any problems.
Plug Type North America
European
Continental
U.K. Chinese Japanese
Plug Shape
Region U.S.A./Canada EU U.K. China Japan
Voltage 120* 230 230 220 100
* When operating the MultiSync monitor with its AC 125-240V power supply, use a power supply cord that matches the power
supply voltage of the AC power outlet being used.
NOTE: This product can only be serviced in the country where it was purchased.
• The intended primary use of this product is as an Information Technical Equipment in an oce or domestic environment.
• The product is intended to be connected to a computer and is not intended for the display of television broadcast signals.
Produktspezifikationen
| Marke: | NEC |
| Kategorie: | Nicht kategorisiert |
| Modell: | SP-RM3 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit NEC SP-RM3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert NEC
15 Juni 2025
15 Juni 2025
19 September 2024
19 September 2024
19 September 2024
13 September 2024
9 September 2024
3 September 2024
2 August 2024
31 Juli 2024
Bedienungsanleitung Nicht kategorisiert
- TC Electronic
- Franklin
- Xlyne
- Lynx Technik
- Bematech
- EnGenius
- Owon
- Wampler
- Otamatone
- Vello
- Thermomate
- Hikmicro
- Tellur
- Domyos
- Summit
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025