Nitecore LHH82 Bedienungsanleitung

Lies die bedienungsanleitung für Nitecore LHH82 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 8 Bewertungen. Hast du eine Frage zu Nitecore LHH82 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Brief Introduction

The LHH82 is a lens heater specially designed for camera lenses with a lter

size of 72~82mm to protect it from fogging and blurring the images. It is

equipped with an intelligent thermal control module to warm up the lens to

a temperature of approx. 45°C (113°F). It is powered by an external USB

power supply and withstand an extremely low temperature of -40°C (-40°F).

It has 4 heating zones with hook-and-loop design for quick installation and

dismount in various environments.

Technical Specications

Input5V⎓2A (MAX)

Input PortUSB-C

Operating Temperature -40°C~40°C (-40°F~104°F)

Heating Temperature 45±5°C (113±9°F)

Compatible with

Camera lenses with a lter size of 72~82mm

Including Canon EF 70-200mm f/2.8L IS III USM and more

Main Materials 1680D Nylon

Dimensions

Zone 1: φ85mm (φ3.35")

Zone 2~4: 394mm×168mm (15.51"×6.61")

Weight190g (6.70oz)

Accessories USB Charging Cable (USB-A to USB-C, 1.5m)

Note:

1. The heating temperature is tested in NITECORE Lab for reference only.

The data may vary in real world use due to dierent environmental

conditions.

2. Please refer to the lter size for more compatible models.

Operating Instructions

As illustrated, after wrapping up the camera lens, use the USB cable to

connect an external power supply (e.g. a power bank or other USB charging

devices) to the charging port to begin the heating process. After that, the

blue indicator beside the input port will turn on steadily.

• After connecting the power supply, the heating process will start

automatically without manual settings.

• The product will start to heat up Zone 2 rst. After Zone 2 reaches

approx. 45°C (113°F), it will then start to heat up Zone 1, 3 and 4

simultaneously.

Warnings

1. Please read the user manual carefully before using the product.

2. Please use the USB charging cable included and high-quality power

banks to power the product. It is recommended to use ocial

NITECORE power banks (sold separately).

3. DO NOT use the product in an environment of -20°C (-4°F) or lower for

over 6 hours, as the USB charging cable could be damaged due to low

temperature.

4. Please connect the applicable external power supply only according to

the specications in this user manual. Insucient input power may lead

to malfunction of the product.

5. DO NOT expose the product in the rainy or moist environment. Keep it

away from any combustible material.

6. The product is only to be used by adults above 18 years old. Children

under this age must be supervised by an adult when using the product.

7. Please unplug the product when it is left unused.

8. DO NOT puncture the product.

9. DO NOT expose the product to corrosive liquid.

10.

Please clean the product with a soft brush. DO NOT rinse it with water.

11. DO NOT leave the product unattended when it is in use. Stop using the

product at any sign of malfunction.

12. DO NOT disassemble or modify the device as doing so will render the

product warranty invalid. Please refer to the warranty section in the

manual for complete warranty information.

13. DO NOT misuse in any way! Use for intended purpose and function only.

Disclaimer

This product is globally insured. NITECORE shall not be held responsible or

liable for any loss, damage or claim of any kind incurred as a result of the

failure to obey the instructions provided in this user manual.

Warranty Service

All NITECORE

®

products are warranted for quality. Any DOA / defective

product can be exchanged for a replacement through a local distributor/

dealer within 15 days of purchase. After that, all defective / malfunctioning

NITECORE

®

products can be repaired free of charge within 12 months

from the date of purchase. Beyond 12 months, a limited warranty applies,

covering the cost of labor and maintenance, but not the cost of accessories

or replacement parts.

The warranty will be nullied if

1. the product(s) is/are broken down, reconstructed and/or modied by

unauthorized parties;

2. the product(s) is/are damaged due to improper use.

For the latest information on NITECORE

®

products and services, please

contact a local NITECORE

®

distributor or send an email to

[email protected]

※

All images, texts and statements specied herein this user manual are

for reference purposes only. Should any discrepancy occur between

this manual and information specied on www.nitecore.com, Sysmax

Innovations Co., Ltd. reserves the rights to interpret and amend the

content of this document at any time without prior notice.

Thanks for purchasing NITECORE!

SYSMAX Innovations Co., Ltd.

TEL: +86-20-83862000 FAX: +86-20-83882723

E-mail: [email protected] Web: www.nitecore.com

Address: Rm 2601-06, Central Tower, No.5 Xiancun Road,

Tianhe District, Guangzhou, 510623, Guangdong, China

Please nd us on facebook: nitecorephotoaccessory

LHH07048221

Made in China

LHH82

LENS HEATER

USER MANUAL

IMPORTANT NOTICE CONCERNING WARRANTY SERVICE

Thank you for purchasing! Before using this product, please nd your verication code on the package box, and go to http://charger.nitecore.com/

validation (or scan the QR code beside the verication code to visit on your mobile phone). Type in your verication code and personal information as

required, and submit the page. After verication, NITECORE will send you a warranty service email. This email and your registration email address are

essential to your possible warranty application. Before you complete the warranty service registration, you cannot enjoy our warranty service for your purchase.

Produktspezifikationen