NuTone LA223WH Bedienungsanleitung
NuTone
Türklingel
LA223WH
Lies die bedienungsanleitung für NuTone LA223WH (8 Seiten) kostenlos online; sie gehört zur Kategorie Türklingel. Dieses Handbuch wurde von 42 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 21.5 Bewertungen. Hast du eine Frage zu NuTone LA223WH oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8

MODEL LA223WH
Page 1
PLUG-IN CHIME
Installation & Operating Instructions
IMPORTANT: This wireless pushbutton and chime set is for
residential use, only. It will operate at an unobstructed distance
of 100 feet. Building materials may reduce operating distance.
Certain building materials; such as, but not limited to metal,
concrete, brick, stucco and foil-lined insulation; cause greater
interference than others; for example, wood or vinyl siding.
INSTALL PUSHBUTTON BATTERY
Refer to Figures 1 and 2.
1. Remove pushbutton and 3V lithium coin-battery from packaging.
2. Insert small, flat-blade screwdriver into bottom of pushbutton and twist
to separate its base.
3. Orient battery with “+” side viewable.
4. Insert battery into holder and press to seat.
5. Insert top of mounting base onto pushbutton and press bottom
together until mounting base snaps securely onto pushbutton.
Use only 3V (volt) lithium CR2032 style coin-battery for replacement.
PLUG-IN CHIME
Refer to Figure 3.
1. Remove chime from packaging.
2. Go to selected chime location.
3. Plug chime into wall-mounted electrical outlet.
Figure 1
“PUSH”
TO OPEN COVER
3V LITHIUM
CR2032-STYLE
COIN
BATTERY
Figure 2
SLOT
Figure 4
LEARN BUTTON
“LEARN” PROCEDURE
Refer to Figure 4.
1. Bring pushbutton in area of plugged-in chime.
2. Press and release “Learn” button on chime.
3. Chime beeps twice to indicate “Learn” mode was entered.
4. Press and release pushbutton.
5. Confirm chime-tone is heard.
6. Repeat Step 4 to cycle through available chime-tones.
7. When desired chime-tone is heard, press and release “Learn” button
(Note: Chime may not respond to this button being pressed if it is too
soon after chime-tone sounds).
8. Chime beeps twice to indicate to confirm exit from “Learn” mode.
9. Press and release pushbutton and confirm chime-tone hasn’t changed
from desired one.
• Up to three (3) pushbuttons can be used with a single chime by
selecting different chime-tones for each pushbutton.
• Chime can erase all “Learned” pushbuttons and tones by pressing
and holding “Learn” button; chime will beep twice; after less than 15
seconds, chime will beep four times; release “Learn” button.
DETERMINE USABLE LOCATIONS
Do not plan to mount pushbutton directly on metal or concrete
surfaces; install a 1/8 to 1/4” wood spacer between pushbutton and
metal or concrete mounting surface.
Some stucco houses have metal mesh in the wall structure, which
will affect the wireless chime performance.
Experiment with various pushbutton and chime locations to
determine location that gives best performance before mounting
permanently.
Chime must not be located within 1-foot of any metal.
Pushbutton and chime should be located within 100-feet of each
other.
1. Go to desired location for pushbutton.
2. Select a level surface and hold pushbutton in desired mounting
position.
3. Press and release pushbutton.
4. Confirm chime-tone sounded.
5. If chime-tone does not sound, temporarily affix pushbutton to
mounting surface with double-stick or folded-over tape; repeat Steps 3
and 4.
6. If chime-tone still does not sound, move location of chime closer to
pushbutton; repeat Steps 3 and 4.
Figure 3
Produktspezifikationen
| Marke: | NuTone |
| Kategorie: | Türklingel |
| Modell: | LA223WH |
Brauchst du Hilfe?
Wenn Sie Hilfe mit NuTone LA223WH benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Türklingel NuTone
29 August 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
21 Juni 2025
21 Juni 2025
4 September 2024
4 September 2024
4 September 2024
4 September 2024
Bedienungsanleitung Türklingel
- Renkforce
- Belkin
- Smanos
- HQ
- Jacob Jensen
- EKO
- Eura
- ACTi
- Elektrobock
- Bitron Video
- AVANTEK
- Blink
- Profile
- Milectric
- Fagor
Neueste Bedienungsanleitung für -Kategorien-
20 Januar 2026
17 Januar 2026
16 Januar 2026
15 Januar 2026
10 Januar 2026
3 Januar 2026
28 Dezember 2025
28 Dezember 2025
27 November 2025
5 November 2025