NUVO Starfish 65/925 Bedienungsanleitung

Lies die bedienungsanleitung für NUVO Starfish 65/925 (56 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 12 Personen als hilfreich bewertet und erhielt im Schnitt 3.9 Sterne aus 6.5 Bewertungen. Hast du eine Frage zu NUVO Starfish 65/925 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

What’s in the Box

Thank you for purchasing the Smart Outdoor Pan & Tilt Camera. Get

started using your new devices by downloading Starfish App, one

convenient app that manages everything straight from your phone. Easily

connect to your home WiFi and control multiple devices from the touch of

your fingertips

Frequently Asked Questions

Yes, you can share your cameras with family and friends who will have

access to view the camera and control your bulbs, plugs, and other

devices. In the app, press the Profile button and click on the “Home

Management” button, and you will be able to give or revoke sharing

permissions. In order to share, the other user should already have

downloaded the app and registered a new account.

Can I share with family and friends?

1

•Make sure the device is under the config status (indicator light is flashing

quickly)

• Make sure the WiFi is available and not too far away from router

• Make sure the WiFi password you input is correct

My device can't be connected to network with App

4

• Make sure the device is powered on

•Make sure the network is stable and the WiFi name and password not

modified. If not, add device again.

• If the network is normal, but it's still offline. Check if there are too many WiFi

connections. You can restart your router to check the status of the device.

My device shows offline in my App

5

The range of your home WiFi is heavily dependent on your home router

and the conditions of the room. Check with your router specifications

for exact range data.

What’s the Wireless Range?

2

Starfish App can control an unlimited amount of devices in an unlimited

amount of locations. Your router may have a limit of how many devices can be

connected to one router.

How many cameras can I control?

3

Technical Specifications

warning

Federal Communications Commission (FCC) Declaration of Conformity

FCC Caution: Any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules.Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between the radiator and your body.

The device could be used with a separation distance of 20cm to the

human body.

Add device-Scan QR code mode

4

Open Starfish App, click “+” on the top right

corner of the page “HOME”, then select “Outdoor

Security Cameras”.

*Please refer to the specific APP interface if there are any difference.

* You can find much more useful information in the Help Center on App.

Scan the QR Code on your phone with

camera. Heard a prompt tone, then press

“I Heard a Prompt”.

Enter WiFi name and password，

then press “Next”

Make sure the indicator is flashing or a

prompt tone is heardthen press “Next”，

Wait for the network configuration completing

Manually rotate the camera up to locate the Reset Button. Press the

Reset Button (as Pic 1) for several seconds until camera starts to beep.

Optional: Insert Micro SD card as shown in Pic 1 (if not pre-installed).

How do I reset my device?

Plug in the Camera to power it up.

3

English Warning Statement:

“This device complies with Industry Canada license-exempt RSS

standard(s). Operation is subject to the following two conditions: (1) this

device may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired operation of

the device."

French Warning Statement:

“Le présent appareil est conforme aux CNR d'Industrie Canada

applicables aux appareils radio exempts de licence. L'exploitation est

autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas

produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout

brouillage radioélectrique subi, même si le brouillage est susceptible d'en

compromettre le fonctionnement."

Radiation Exposure Statement:

This equipment complies with Canada RF exposure limits set forth for an

uncontrolled environment. This equipment should be installed and

operated with minimum distance 20cm between the radiator & your body.

Cet appareil est conforme aux limites d'exposition aux rayonnements de

l'IC établies pour un incontrôlé environnement. L'appareil doit être installé

et utilisé avec une distance minimale de 20cm entre le radiateuet votre

corps.

Register an account on your Starfish App

2

Have your WiFi Network and Password available.

Make sure your mobile device is running iOS® 9 or higher or Android™

4.1× or higher

Make sure you’re connecting to a 2.4GHz WiFi network (Cannot connect

to 5GHz Networks)

Download the Starfish App from App Store or Google Play.

1

Connect to your Network

3.

4.

Align the bottom of the camera’s main body, and aim to the right angle.

Then rotate and snap it into the base until it is completely fixed.

Insert the Type C end into the camera interface. Finally insert the adapter

into the socket, then the device will power on.

1.

2.

Take out all accessories and arrange them in order

Refer to the bracket size,drill two holes on the installation area,such as the

wall, ceiling etc. Fix the mounting bracket on the installation area,screw in

the 2 screws to secure to the base.

Installation instructions

Smart Outdoor Pan & Tilt Camera

User Manual

Model : 65-925

Please read this User Manual carefully before use

Make sure WiFi is available and connected to the

Internet.Connect the camera to the power, then

system startup completed.

Smart Camera x1

User Manual x1

Mounting Bracket x1

Corded power adapter x1

Screw bag x1

*:Only some indoor cameras support indicator lights and others sound a prompt

tone, please refer to the actual product.

Audio: intemal Speaker and Microphone

Storage: supports up to 128G Micro SD card (32GB SD Card included)

WiFi: IEEE 802.11b/g/n, 2.4GHz(not compatible with 5GHz WiFi networks)

Indicator lamp :

1. Power on indicator light: The blue light remains on a few seconds ;

2 Enter the paring network and waiting for the paring network status:

blue light flashing quickly;

3. Paring process: Blue light flashing slowly:

4. After successful network paring: the blue light goes out;

Pic 1

Micro SD card

Reset Button

Produktspezifikationen