OSD Audio Black R43SQ Bedienungsanleitung
OSD Audio
Lautsprecher
Black R43SQ
Lies die bedienungsanleitung für OSD Audio Black R43SQ (4 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 8 Personen als hilfreich bewertet und erhielt im Schnitt 3.8 Sterne aus 4.5 Bewertungen. Hast du eine Frage zu OSD Audio Black R43SQ oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4
R43 R43SQ | INSTALL GUIDE
BLACK R43-R43SQ INSTALL GUIDE
Preparation:
Installation:
Tools For Installation Speaker Wire Guide
Considerations
Cut Out
- Pencil
- Drill
- Tape Measure
- Wire Cutter
- Phillips Screwdriver
- Utility Knife
- Safety Eye Wear
- Gloves
- Sandpaper
- Where is the best place to install the speakers?
- Where do the speakers sound the best?
- Separate the speakers 6 - 10 feet apart.
- If you intend to paint the grilles, do so before installation.
NOTE: This is the most important part of the entire installation.
If you are not certain whether any obstructions exist behind the
desired mounting area, you should start by cutting a small hole in
the center of your penciled mounting hole with a drywall saw.
Trace along the included template for R43 or R43SQ. Cut along the
traced line using a drywall saw or rotary drill. Use a piece of sandpaper
to sand down the cut out edge for a smoother contour.
(See Diagram 2.)
18AWG minimum - for distances up to …………………. 10 ft
16AWG - from …………………………………..…... 10 to 50 ft
14AWG - from …………………………………...… 50 to 100 ft
Diagram 2
Mounting
Tighten the mounting brackets by simply turning the screws on
the front of the speaker bafe slowly clockwise. The quick-turn
mounting system and frame will “sandwich” or clamp around the
dry-wall to hold the speaker securely in place once fully tightened
to the locked position.
(See Diagram 3.)
Open PositionLocked Position
Diagram 3
Placement
There are many options for proper speaker placement depending
upon speaker type and application. It’s important to carefully plan the
placement of your speakers, as installation requires that you cut a
hole in your wall or ceiling.
(See Diagram 1.) Typical speaker placement for a 5.1 and 7.1
speaker system.
TV
Diagram 1
BLACK R43-R43SQ INSTALL GUIDE
Specications
R43
R43SQ
Type: 2-Way Ceiling Speaker
Woofer: 4" Polypropylene
Tweeter: 0.5” PEI Dome
Power Handling: 50 Watts
Freq Response: 85-18kHz
Impedence: 8 Ohm
Sensitivity: 90dB 1W/1m
Grille: Trimless
Dimensions: R43 6.29” x 3.39”
R43SQ 5.0” x 5.0 ” x 3.39”
Cut Out: R43 5.7”
R43SQ 4.3” x 4.3”
Weight: 1.76 lbs
Connection
When connecting any speakers to the amplier or receiver, always
make sure the power is off. Locate the connection terminals on the
back of your receiver or amplier. Always make sure to connect au-
dio out from the back of your receiver or amplier to the speakers.
(See Diagram 4.)
NOTE: Not all Amplier/Receivers can safely play more than one
pair of speakers at once. Please refer to your owner’s manual for
impedance and wattage compatibility.
Amplier
Left Right
Diagram 4
88mm/3.46”
84mm/3.30
160mm/6.29”
160mm/6.29”
127mm/5.0”
127mm/5.0”
85mm/3.34”
Produktspezifikationen
| Marke: | OSD Audio |
| Kategorie: | Lautsprecher |
| Modell: | Black R43SQ |
Brauchst du Hilfe?
Wenn Sie Hilfe mit OSD Audio Black R43SQ benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprecher OSD Audio
30 Mai 2025
30 Mai 2025
30 Mai 2025
30 Mai 2025
30 Mai 2025
30 Mai 2025
24 September 2024
24 September 2024
19 September 2024
19 September 2024
Bedienungsanleitung Lautsprecher
- JB Systems
- Adler
- Match
- CyberData Systems
- Sangean
- Hifonics
- R-MUSIC
- Bowers And Wilkins
- TVLogic
- Dyon
- Motorola
- Tronsmart
- Sinji
- Manta
- Axis
Neueste Bedienungsanleitung für -Kategorien-
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025