Ozito PXGAR-500 Bedienungsanleitung


Lies die bedienungsanleitung für Ozito PXGAR-500 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Ozito PXGAR-500 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
1
ASSEMBLY INSTRUCTIONS
1223
PXGAR-500
ROBOT LAWN
MOWER GARAGE
ozito.com.au
CONTENTS
8 x Ground Anchor Screws
Hex Key & Fasteners
2
KNOW YOUR PRODUCT
1. Garage Hood
2. 2 x Lock
3. 2 x Foot
4. 2 x Threaded Pin
5. 2 x Nut
6. 4 x Cross-Head Screw
7. Hex Key
8. Strut - Short
9. 8 x Ground Anchor Screws
10. Strut - Long
11. Hex Key Storage
ROBOT LAWN MOWER GARAGE
1 2 3
4 5 6 7 9 10 38
112
SETUP & PREPARATION
STRUT - Short
STRUT - Long
3
Assembly
1. Align the pre-drilled hole in the end of each Strut with the corresponding hole in each of the
Feet. With the holes aligned fasten together using the four Cross-Head screws.
WARNING! NEVER STAND OR SIT ON THE ROBOT LAWN MOWER GARAGE.
THE GARAGE IS TO BE USED ONLY FOR ITS PRESCRIBED PURPOSE.
Proper Use
The robot lawn mower garage is designed to protect your robot lawn mower and its charging
station from weather conditions such as rain and sun. The garage does not protect your robot
lawn mower from lightning.
2. Place the Garage Hood on
the Feet and t the two Nuts
on the outside in the recess.
Push the Threaded Pins
from the inside through the
Garage Hood, then through
the Feet and into the two
Nuts. Fully tighten the
Threaded Pins with the Hex
Key.


Produktspezifikationen

Marke: Ozito
Kategorie: Nicht kategorisiert
Modell: PXGAR-500

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PXGAR-500 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten