Ozito PXLMB-335 Bedienungsanleitung


Lies die bedienungsanleitung für Ozito PXLMB-335 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Ozito PXLMB-335 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
BLADE ASSEMBLY
BLADE ASSEMBL
Freecall
(NZ) 0508 069 486
www.ozito.com.au
(Aus) 1800 069 486
35
OZITO 25 Fox Drive, Dandenong South, Vic 3175, Australia.
ALWAYS HANDLE THE BLADE WITH CARE - SHARP EDGES CAN CAUSE
WARNING!: ALWAYS ENSURE THE MOWER BLADE HAS
COMPLETELY STOPPED, REMOVE THE SAFETY KEY, BATTERIES AND
GRASS CATCHER PRIOR TO ANY MAINTENANCE.
REMOVING AND FITTING THE BLADE:
Only replace the blade with a genuine Ozito PXC replacement blade, as this will ensure
top performance and safety under all conditions.
1. To remove the blade bolt, hold the blade
rmly and with a 13mm socket loosen the
blade bolt by turning it anti-clockwise.
Note: A piece of timber will assist in holding
the blade while removing or tightening the
blade bolt.
2. Remove the blade bolt, spring washer, blade
and spacer.
3. To t the blade, rst place the spacer, then
the blade (writing facing out) over the centre
hole of the spacer, aligning the lugs.
Note: The shape and position of the lugs
prevent the blade from tting in the wrong
direction.
4. Fit the bolt and spring washer with a
universal wrench. The tightening torque should
be approx. 25Nm.
Replace the metal blade after 50 hours mowing or 2 years
whichever is sooner. If the blade is cracked or damaged replace
it with a new one.


Produktspezifikationen

Marke: Ozito
Kategorie: Nicht kategorisiert
Modell: PXLMB-335

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PXLMB-335 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten