PCE Instruments PCE-313 S Bedienungsanleitung


Lies die bedienungsanleitung für PCE Instruments PCE-313 S (8 Seiten) kostenlos online; sie gehört zur Kategorie Messung. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu PCE Instruments PCE-313 S oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/8
Manual
PCE-313 Thermo Hygrometer
PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
FL-33458
USA
Tel: (561) 320-9162
Fax: (561) 320-9176
info@pce-americas.com
www.pce-instruments.com/english
www.pce-instruments.com
PCE Instruments UK Ltd.
Units 12/13
Southpoint Business Park
Ensign way
Hampshire / Southampton
United Kingdom, SO31 4RF
From outside UK: +44
Tel: (0) 2380 98703 0
Fax: (0) 2380 98703 9
info@industrial-needs.com
CONTENTS
TITLE PAGE
I. Saf
ety Information
…………………………………………………………………...
1
II. Introduction
...………………………………………………………………………...
1
III. Specifications
…………………………………………………………………………..
1
IV
. Symbol Definition and Button Location
………………………………..
2
V. Operation Instructions
………………………………………….…………..…… 3
4.1 Power-Up………………………………………………………………………………….....
3
4.2 Humidity and Temperature Measurement………………………………………......
3
4.3 Selecting the Temperature Scale………………………………………………………..
3
4.4 Data-Hold Operation……………………………………………………………………....
3
4.5 Dat
aLogger…………………………………………………………………………………
3
4.6 Clock Setup ………………………………………………………………………………...
3
4.7 Recor
ding Interval Setup……..………………………………………………………….
4
4.8 Time Operation…………….……………………………………………………………....
4
4.9 MAX/MIN Operation……………………………………………………………………..
4
4.10 Auto Power Off……………………………………………………………………………
4
4.1
1 Low Battery Condition …………………………………………………………………..
4
4.12 Digital Output……………………………………………………………………………..
\
4
VI. Setup TestLink (Humidity Temperature DataLogger)
RS232
interface software
……………………………………………………...
.
7
I. Safety Information
Read the following safety information carefully before attempting to operate or service the meter.
Use the meter only as specified in this manual; other
wise, the protection provided by the meter may
be impaired.
Environment conditions
ο
Altitude up to 2000 meters
ο Relatively
humidity
90%
m
a
x
.
ο
Operation Ambient 0 ~ 50
Maintenance & Clearing
ο
Repairs or servicing not covered in this manual should only be performed by qualified personnel.
ο
Periodically wipe the case with a dry cloth. Do not use abrasives or solvents on this instrument.
Safety symbols
Compl
y with EMC
Read safety Information first.
II. Introduction:
This instrument is a digital Humidity/Temperature meter that uses a polymer capacitive and
semiconductor sensor. This operations manual contains general product information an
d
specifications. Its internal memory can keep up to 16300 readings. (note1.) It uses a RS232
interface to perform bi-directional communication with PC.
III. Specifications:
Numerical Display : 4 digital Liquid Crystal Display.
Measurement
Range :
Humidity: 0%~100%RH
Temperature: -20~+60 -4 ~+140
Resolution : 0.1%RH , 0.1 ,0.1
Accu
racy :
Humidity:±2.5%RH at 25
Temperature: ±0.7 ±1.4
Response Time :
Humidity: 75 sec. In slowly moving air
Temperature: 40 sec. in slowly moving air
Signal Outp
ut : RS-232 Data Output
Operating Environment : 0~50, 32~122 0 to 90%RH non-condensing
Storage Environment : -10 ~60 , 14 ~140 0 to 80%RH non-condensing
Power Requirements :
Battery: One 9V battery 006p or IEC 6F22 or NEDA1604
AC adapter: 9V
DC / 10mA minimum
Plug Diameter: 3.5 mm×1.35mm
Battery Life : Approx. 100hrs with alkaline battery
Weight : Approx.320g
note1:
Every time you press "REC" button to start recording data and press "REC" bu
tton again to stop


Produktspezifikationen

Marke: PCE Instruments
Kategorie: Messung
Modell: PCE-313 S

Brauchst du Hilfe?

Wenn Sie Hilfe mit PCE Instruments PCE-313 S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten