Phase Technology P3-35 Bedienungsanleitung

Lies die bedienungsanleitung für Phase Technology P3-35 (8 Seiten) kostenlos online; sie gehört zur Kategorie Empfänger. Dieses Handbuch wurde von 42 Personen als hilfreich bewertet. Hast du eine Frage zu Phase Technology P3-35 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

/ 8 PDF

Warning

Phase Technology products must be installed by a professional audio installer/contractor. Forsafetyandfor

optimumaudioperformance,installermustfollowalldiectionsissuedby r .Phase Technology

Box Contents

1- Amplier

1- Bluetooth

®

antenna

1- IR receiver with 1m cord

1- 32 V, 3.75 A power supply

1- Six-pin Euroblock connectors

1- Three-pin Euroblock connectors

1- Mounting bracket

2- 2" Velcro strips

1- Double sided tape disk for IR receiver

The P3-35 is a 2 or 3 channel amplier with Dolby Digital

®

decoding. It is designed to be used with either an analog or digital input from a TV or other audio

source. With a digital input it automatically senses Dolby Digital and PCM and switches modes. The P3-35 takes the input signal from an audio source, decodes

it and outputs either a 2 or 3 channel amplied signal to a sound bar or set of speakers. When set in the 2 channel mode it will take a stereo or multi-channel

signal and mix it down to 2 output channels (left and right). When set in the 3 channel mode it will take a stereo or multi-channel signal and mix it into 3 output

channels (left, right and center). In either mode there is a sub out option.

When used in place of internal TV speakers, change the TV’s audio setting to external speakers. Teach the P3-35 the TV’s volume codes and it seamlessly

operates with no additional remotes.

Install Instructions For:

P3-35

Produktspezifikationen