Proaim STD-PTZ-01 Bedienungsanleitung
Proaim
Nicht kategorisiert
STD-PTZ-01
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Proaim STD-PTZ-01 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 1.5 Benutzern mit durchschnittlich 3.5 Sternen bewertet
Seite 1/4

What s In The ’
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
3 Stage PTZ Camera Support Stand w -5/8”
Baby Pin & Ball Head (STD PTZ- -01)
A s s e m b l y M a n u a l
Ball Joint
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
PTZ 3 Stage Stand-
Bag packing
Pouch for Ball Joint
3 x Foots

2
Camera Support Stand Setup
Stretch out the legs and secure them properly
with the help of knobs.
NOTE: The stand comes with spiked feet &
rubber shoes, that makes it t to be used on
dierent surfaces with extra stability.
Adjust the height of the stand by loosening the
top and boom knobs and then ghten it
properly.
Insert the feet into the legs and ghten them
properly.
Loosen the top and boom knobs as shown in
the image.
Adjust the height of the PTZ support stand -
according to your requirement.

3
Loosen the ball head's knob and mount it
properly on the 5/8" baby pin.
By loosening the telescopic knob, adjust the
height of the stand and ghten the knob
properly.
Properly ghten the knob, as shown in the
image.
Loosen the knob of the ball head and remove
it.
NOTE: The Stand has 5/8" baby pin mount on
the top to aach the addional camera support
accessories.
NOTE: The support Stand has 3 secons to
adjust the height with quick & secure locking
knobs. The central main post of the stand is
adjustable, through which you can change its
height as per your requirement.
Produktspezifikationen
Marke: | Proaim |
Kategorie: | Nicht kategorisiert |
Modell: | STD-PTZ-01 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Proaim STD-PTZ-01 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Proaim

7 Juni 2025

7 Juni 2025

7 Juni 2025

5 September 2024

3 September 2024

26 August 2024

26 August 2024

10 Juni 2024

8 Februar 2024

4 Mai 2023
Bedienungsanleitung Nicht kategorisiert
- Nicht kategorisiert Powertec
- Nicht kategorisiert OSD Audio
- Nicht kategorisiert Eberspacher
- Nicht kategorisiert Dorma
- Nicht kategorisiert Micro Matic
- Nicht kategorisiert Elektrobock
- Nicht kategorisiert Easypix
- Nicht kategorisiert EA Elektro Automatik
- Nicht kategorisiert Prem-i-air
- Nicht kategorisiert Caberg
- Nicht kategorisiert Argus
- Nicht kategorisiert Sitecom
- Nicht kategorisiert Synology
- Nicht kategorisiert BakkerElkhuizen
- Nicht kategorisiert SurgeX
Neueste Bedienungsanleitung für -Kategorien-

7 Juni 2025

7 Juni 2025

7 Juni 2025

7 Juni 2025

7 Juni 2025

7 Juni 2025

7 Juni 2025

7 Juni 2025

7 Juni 2025

7 Juni 2025