Prologue 36-4744 Bedienungsanleitung

Lies die bedienungsanleitung für Prologue 36-4744 (5 Seiten) kostenlos online; sie gehört zur Kategorie Thermometer. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 12 Bewertungen. Hast du eine Frage zu Prologue 36-4744 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

20131209

GREAT BRITAIN • CUSTOMER SERVICEtel: 08545 300 9799

e-mail: customer[email protected] internet: www.clasohlson.com/uk

Sensor for 36-4741

Art.no 36-4744

Please read the entire instruction manual before using the product and save it for future reference.

We reserve the right for any errors in text or images and any necessary changes made to

technical data. If you have any questions regarding technical problems please contact our

customer services.

Product description

Temperature sensor for wireless thermometer 36-4741.

Operation

3. Refit the battery cover.

4. Depress the main unit’s [ CH ] button until the aerial symbol begins to flash. This will initiate

the automatic search function. The main unit will scan for all connected sensors and

display temperature data from these sensors on their respective channel.

5. Scanning will cease after 3 minutes.

TX button

Depress the [ TX ] button whenever you desire to send the latest information to the main unit.

Care and maintenance

•Remove the batteries if the product is not to be used for a long time.

•Clean the exterior using a lightly moistened cloth. Only use mild detergents,

never solvents or corrosive chemicals.

Disposal

Disposal of this product should be in accordance with local regulations.

If you are unsure how to proceed, contact your local authority.

Specifications

Temperature rangeApprox. -50 to +70 ºC

Frequency433.92 MHz

RangeApprox. 25 m

The sensor transmits in 35 second intervals.

1. Remove the sensor’s battery cover by

unscrewing its 4 retaining screws.

Insert 2 × AAA/LR03 batteries,

following the markings on

the bottom of the battery holder.

2. Set the sensor’s selector switch to

the desired channel number.

Note: Remember not to use the same

channel number as any other connected

sensor is using.

Produktspezifikationen