Pulsar S108 Bedienungsanleitung

Pulsar Nicht kategorisiert S108

Lies die bedienungsanleitung für Pulsar S108 (5 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 5 Bewertungen. Hast du eine Frage zu Pulsar S108 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/5

S108

v1.4

S -ports switch for 8 IP cameras 108 10

Edition 6 z dnia 18.07.2019 :

: Supercedes the edition 5 from 04.02.2019 EN**

Features:

 Switch 10 ports

8 PoE ports 10/100Mb/s (data and power supply)

2 ports Mb/s (UP LINK) 10/100

 Long Range mode (up to 250m)

 W for each PoE port, supports devices complaint 30

with the IEEE802.3af/at standard (PoE+)

 Supports auto-learning and auto-aging of MAC

addresses (1K size)

 The PSD V DC/2,3 A/120 W max. 520230

power supply desktop type included

 Additional assembly elements

 LED indication

 warranty 2 year from the production date –

Example of use.

1. Technical description

1.1. General description.

S108 is a 10-ports PoE switch designed to supply IP cameras operating in IEEE 802.3af/at standard.

Automatic detection of any devices powered in the PoE/PoE+ standard is enabled at the 1 8 ports of the switch. The UP LINK –

ports is used for connection of another network device via RJ45 connector The LEDs at the front panel indicate the operation .

status (description in the table below).

The PoE technology ensures a network connection and reduces installation costs by eliminating the need to supply a

separate power cable for each device. This method allows supplying other network devices, such as IP phone, wireless access

point or router.

1.2 Block diagram.

Fig. 1. Block diagram.

1.3 Description of components and connectors.

Table 1. (See Fig . 2)

Component No.

( . 2) Fig

Description

[1]

8 x PoE ports (1 ) ÷8

[2]

2 x UP LINK port

[3]

Power Socket of the DC

[4]

Additional assembly elements

[5]

Switch of mode Long Range

Fig. 2. . The view of the switch

1.4 Technical parameters

Table 2 .

Ports

10 ports 10/100Mb/s (8 x PoE + 2 x UP LINK)

with connection speed auto-negotiation and MDI/MDIX Auto Cross)

PoE power supply

IEEE 802. 3af/at 8 ports), 52 V DC / 30 W at each port * (1÷

Long Range mode

Long Range, VLAN

Protocols, Standards

IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP

Bandwidth

1,6Gbps

Transmission method

Store-and-Forward

Optical indication of

operation

Switch power supply;

Link/Act;

PoE Status

Power supply

~100 ÷ 240 V; 50/60 Hz;1,3 A

the PSD 520230 52 V DC/2,3 A/120 W max. power supply desktop type

Operating conditions

temperature - 10°C ÷ 40°C,

relative humidity - no condensation 5% 90%,

Dimensions

W=190, H=28, D=105 [+/- 2mm]

Additional equipment

plate to be xed surface

Gross/Net weight

1,2 / 1,4 kg

Protection class

EN 60950-1:20 07

II (second)

Storage temperature

- 20°C ÷ 60°C

Declarations

* The given value of 30 W per port is the maximum value. The total power consumption should not exceed 96 W.

2. Installation

Requirements 2.1.

The unit should be mounted in conned spaces, in accordance with the 2nd environmental class, with normal relative

humidity (RH=90% maximum, without condensation) and temperature from -10°C to +40°C. Ensure the free flow of air around

the unit. The PSU shall work in a vertical position that guarantees suicient convectional air-ow through ventilating holes of the

enclosure.

The switch load balance should be done before installation. The given value of 30 W per port is the maximum value

referring to a single output. The total power consumption should not exceed 96 W. The increased demand for power is

particularly evident in the case of cameras with heaters or infrared illuminators - when launching these features, the power

consumption increases rapidly, which may adversely aect the operation of the switch. As the device is designed for a

continuous operation and is not equipped with a power-switch, therefore an appropriate overload protection in the power supply

circuit should be provided. The electrical system shall be made in accordance with applicable standards and regulations.

2.2. Long Range mode

Switch enables operation in two modes: standard and extended range. When the Long Range switch is in

STANDARD position (see Fig. 5), PoE ports operate at 100 Mb / s up to 100 meters. After switching to EXTEND position,

range is increased to 250 meters and speed is reduced to 10 Mb / s. Additionally, VLAN function, which isolates the PoE

ports between each other (communication takes place between the UpLink ports and individual PoE), is activated. In both

modes, the UpLink port speed is 100 Mb / s.

Note: Changing the modes requires a power restart!

Produktspezifikationen

Marke:	Pulsar
Kategorie:	Nicht kategorisiert
Modell:	S108
Breite:	190 mm
Tiefe:	105 mm
Gewicht:	1200 g
Produktfarbe:	Schwarz
Höhe:	28 mm
AC Eingangsspannung:	230 V
DC input Spannung:	52 V
Betriebstemperatur:	-10 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 90 %
Paketgewicht:	1400 g
Netzstandard:	IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Zertifizierung:	CE, RoHS, REACH
Power over Ethernet (PoE):	Ja
LED-Anzeigen:	Ja
Luftfeuchtigkeit bei Lagerung:	-20 - 60 %
Anzahl der basisschaltenden RJ-45 Ethernet Ports:	10
Basic Switching RJ-45 Ethernet Ports-Typ:	Fast Ethernet (10/100)
MAC-Adressentabelle:	1000 Eintragungen
Routing-/Switching-Kapazität:	- Gbit/s
VLAN-Unterstützung:	Ja
Eingangsstrom:	2.3 A
Store-and-Forward:	Ja
Gesamtleistung Power over Ethernet (PoE):	96 W
Anzahl Power over Ethernet (PoE) Anschlüsse:	8
Selbstlernen von MAC-Adressen unterstützt:	Ja
Auto-Alterung von MAC-Adressen unterstützt:	Ja
Power over Ethernet (PoE) Leistung pro Anschluss:	30 W
Power-over-Ethernet (PoE)-Typ unterstützt:	PoE+