Pyle PDWR69BTW Bedienungsanleitung
Pyle
Lautsprecher
PDWR69BTW
Lies die bedienungsanleitung für Pyle PDWR69BTW (3 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 10 Bewertungen. Hast du eine Frage zu Pyle PDWR69BTW oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/3
www.PyleUSA.comwww.PyleUSA.com
Wall Mountable, 100 Watts MAX
with 2-Way Full Range Stereo
Sound Reproduction, Pair
PDWR69BTB - PDWR69BTW
6.5'' Pro Active Wireless BT
Streaming Speakers
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Note:
Anytime you note distortion, reduce the volume to a lower setting. Never
allow your amplier to be driven into " ". Otherwise the speakers clipping
may be damaged. Damage caused by operating the speakers at distorted
volume levels is not covered by the warranty.
WIRELESS BT PAIRING
Ensure the speaker is connected to the power supply and turned on.
Any BT device (such as phones, tablets, laptops etc.) is available for pairing.
Note:
• Please press the "MODE" button to choose the Bluetooth input.
• There will be a prompt sound when BT is connected/disconnected.
• BT Input has the priority when BT input and RCA input are connected
simultaneously. To listen to RCA input audio, disconnect from BT before
using a RCA input device.
• One device can only connects or control one BT speaker at a time.
If device A connects and controls BT, device B cannot search or control the
BT speaker. Device A MUST no longer be connected, then device 8 can
connect and control.
• If you want to use the TWS connection, make sure two speakers are
turned ON and in BT MODE, then hold the TWS button from anyone of the
speakers for 3 seconds,two active units will connected automatically.
• If pairing fails the rst time, restart all the equipment and then follow the
above instructions.
• If you are unable to reconnect a previously connected device, remove the
" " from the list of paired devices, and then follow the above PyleUSA
instructions again.
• The BT connection will be lost if the distance between the speaker and the
BT device exceeds 1Om (32.8 ft.).
PyleUSAPyleUSA
1. Open the setting
menu and select BT.
2. Turn on BT and
search devices.
3. Click "PyleUSA"to
pair with your device.
CARE AND MAINTENANCE
• Turn off the power to the speaker when unused for long periods of time.
• Ensure all equipment is turned off prior to cleaning. Surfaces and cabinet
need only occasional dusting/cleaning. Never use chemicals or solvents as
they may damage the surface. Always clean using a dry cloth.
• Never touch the speaker drivers.
Technical Specs:
• Power Supply: 100W (MAX Power)
• RMS Power: 50W (Passive Speaker)
• Speaker Size: Sound System: 6.5'' Subwoofers: 0.5'' Tweeter
• Subwoofer Type: 6.5'' Paper Cone
• Tweeter Type: 0.5'' Mylar Dome
• Frequency Response: 70-20 kHz (+/-3dB)
• Speaker Impedance: 8 Ohm
• Audio Sensitivity: 86dB
• Construction Material: Polypropylene
• Power Cable Length: 3.94 ft.
• Power Output: 100-240V
• Single Speaker Dimensions (L x W x H): 8.5'' x 7.6'' x 11.7'' -inches
Produktspezifikationen
| Marke: | Pyle |
| Kategorie: | Lautsprecher |
| Modell: | PDWR69BTW |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Pyle PDWR69BTW benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprecher Pyle
10 Oktober 2025
29 September 2025
18 September 2025
21 August 2025
9 August 2025
9 August 2025
9 August 2025
9 August 2025
27 Juli 2025
27 Juli 2025
Bedienungsanleitung Lautsprecher
- TERRIS
- Fluance
- Polsen
- Trevi
- Kanto
- Milwaukee
- House Of Marley
- Fender
- RCF
- Jam
- Digitus
- Hammond
- Rega
- Avanca
- C.Perkins
Neueste Bedienungsanleitung für -Kategorien-
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
19 Januar 2026
19 Januar 2026
19 Januar 2026
19 Januar 2026
18 Januar 2026
18 Januar 2026