Qtx 178.201 Bedienungsanleitung

Qtx Lautsprecher 178.201

Lies die bedienungsanleitung für Qtx 178.201 (4 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 24 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 12.5 Bewertungen. Hast du eine Frage zu Qtx 178.201 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/4

QR5A

5.25” ACTIVE STEREO SPEAKER SET

Item ref: 178.200UK, 178.201UK

User Manual

178.200UK, 178.201UK User Manual

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

Introduction

Thank you for choosing the 5 active speaker set. Please read this manual prior to use to avoid damage to QR

the item. These compact, self-contained stereo speaker sets are designed to deliver high quality near-field or

perimeter coverage for various monitoring and installed sound applications

Contents

Please take care when unpacking this product. Inspect for any damage and ensure you have the following

components…

 QR5 active speaker with built-in amplifier

 QR5 passive satellite speaker

 2 x wall-mounting brackets with screw caps

 Satellite speaker wire

 Mains lead(s)

Safety Conventions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS

RISQUE DE CHOC ELECTRIQUE NE

PAS OUVRIR

This symbol indicates that dangerous voltage constituting a risk of electric shock is

present within this unit

This symbol indicates that there are important operating and maintenance instructions

in the literature accompanying this unit.

Warning

To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture.

To prevent electric shock do not remove the rear cover.

No user serviceable parts inside. Refer servicing to qualified service personnel.

Safety

 Prior to connecting the dc adaptor to mains, ensure that the supply voltage is correct.

 Avoid ingress of water or particles into the enclosure.

Placement

 Keep the unit out of direct sunlight and away from heat sources.

 Keep the unit away from moisture or dusty environments.

 Allow adequate space for cooling at the rear of the active speaker unit

Cleaning

Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls. Do not use solvents.

178.200UK, 178.201UK User Manual

Panel layout

Setting up

For near-field or desktop use, space speakers apart for adequate stereo separation depending on

proximity to the listener. For installations using the supplied wall-mount brackets, attach the brackets

to a solid surface using fixings which are sufficient to hold the weight of the active speaker. Take

care to mount the active unit close enough to a mains outlet for the supplied adaptor to reach.

Fix the speaker units to the brackets at top and bottom using the supplied screw caps. Each can be

rotated to aim the general direction of sound output.

If the speakers are mounted at height or where falling objects may be hazardous, it is advised to

attach a secondary means of support (e.g. drop-wire or chain)

Operation

Link the satellite speaker to the spring terminals on the powered speaker (7) using the supplied

speaker lead (connecting red to red and black to black)

With the rotary VOLUME (4) control set to minimum and TREBLE and BASS controls (1, 2) set to the

vertical (12 o’clock) position, connect the supplied mains lead to the rear of the active unit (6) and

plug into a suitable mains outlet. Connect the source signal into the active unit via the L+R RCA

connectors ). Switch the power on (5) and gradually turn the rotary VOLUME control clockwise and (3

increase volume level to the required amount.

Adjust TREBLE (2) and BASS (1) controls to provide the desired tonal response.

The centre position is unaffected, to the left is cut and to the right is boost.

Turn down the rotary VOLUME control before switching off.

BASS EQ control

TREBLE EQ control

Power on/off switch

VOLUME control

Power on/off switch & indicator

Mains inlet (fig.8)

Satellite speaker connection (spring terminals)

Produktspezifikationen

Marke:	Qtx
Kategorie:	Lautsprecher
Modell:	178.201
Breite:	180 mm
Tiefe:	150 mm
Gewicht:	7000 g
Empfohlene Nutzung:	Studio
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Höhe:	255 mm
RMS-Leistung:	40 W
Audio Kanäle:	2.0 Kanäle
Magnettyp:	Neodym
Anzahl des Antriebs:	2
Frequenzbereich:	32 - 22000 Hz
Woofer:	Ja
Tieftönerdurchmesser (imperial):	5.25 "
Hochtöner:	Ja
Hochtönerdurchmesser (Imperial):	1 "
Lautsprecherplatzierung:	Floor, Wall-mountable
Hochtönerdurchmesser:	25 mm
Empfindlichkeit:	89 dB
Audio-RCA-Eingänge:	1
Lautsprechertyp:	2-Wege
Tieftönerdurchmesser:	133 mm