Rackmount.IT RM-WG-T7 Bedienungsanleitung
Rackmount.IT
Nicht kategorisiert
RM-WG-T7
Lies die bedienungsanleitung für Rackmount.IT RM-WG-T7 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 2 Bewertungen. Hast du eine Frage zu Rackmount.IT RM-WG-T7 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1

Type
Product Line
Type
Supported Models
DIMENSIONS
COLOR
PRODUCT DIMENSIONS
PACKING DIMENSIONS
(height x width x depth)
PACKAGE CONTENTS
MOUNTING INSTRUCTIONS
Consider the environment,
recycle where applicable.
In case of problems please contact your
reseller or sales@rackmount.it.
EMEA Ofce
Nonnenveld 27
4811 HN Breda
The Netherlands
T +31 76 200 37 40
E sales@rackmount.it
WWW.RACKMOUNT.IT
US Ofce
9201 Metric Blvd - Unit A
Austin - TX 78758
United States
T +1 512 521 03 33
E sales-us@rackmount.it
Qty Description
WG-RACK
RM-WG-T7
RM-WG-T7i
1.3/2U
WatchGuard Red
80 x 520 x 270 mm
3.14 x 20.47 x 10.63 in
46 x 482 x 217 mm
1.81 x 18.98 x 8.54 in
WATCHGUARD
FIREBOX T80
1. Place the power supply on the rack and tie it down with 2 zip ties.
2. Remove the 4 rubber feet from the WatchGuard.
3. Remove the bolt from the side of the appliance with the Torx key.
4. Place your WatchGuard unit on the rack and x the unit with the provided bolt and tighten it
lightly.
5. Tie the excess length of the power cable down with the 3rd zip tie.
6. Connect the cables from your WatchGuard to the connectors. Tip: start with the bottom row.
7. Optional: use two zip ties to hold the cables together.
8. Place your WG-Rack in your 19 inch rack.
Please ensure proper ventilation according to the network appliance manufacturer guidelines.
Please note that this unit is slightly higher than 1U.
1 WG-Rack + RJ45 couplers
5 Zip ties
1 Torx key
1 Bolt 3x6mm
10 Cables - 0.5 meter
Industrial version is supplied with shielded couplers and cables Revision 5 - 09-06-2021
Produktspezifikationen
Marke: | Rackmount.IT |
Kategorie: | Nicht kategorisiert |
Modell: | RM-WG-T7 |
Breite: | 482 mm |
Tiefe: | 217 mm |
Mitgelieferte Kabel: | LAN (RJ-45), USB |
Produktfarbe: | Rot |
Höhe: | 44 mm |
Verpackungsbreite: | 530 mm |
Verpackungstiefe: | 270 mm |
Verpackungshöhe: | 110 mm |
Warentarifnummer (HS): | 85389099 |
Typ: | Montageschelle |
Kabellänge: | 0.5 m |
Montageset: | Ja |
Schnellinstallationsanleitung: | Ja |
Kompatibilität: | WatchGuard Firebox T80 |
Rack-Kapazität: | 1U |
Anzahl der Kabel: | 10 |
Koppler enthalten: | Ja |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Rackmount.IT RM-WG-T7 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Rackmount.IT
1 August 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
30 Juli 2025
30 Juli 2025
Bedienungsanleitung Nicht kategorisiert
- Firefriend
- HQ
- CSFG
- Aquasure
- Revell
- Kitchenware
- AgfaPhoto
- Becken
- FeiYu-Tech
- Heitech
- Spypoint
- MEE Audio
- Newline
- Enders
- Cascade Audio Engineering
Neueste Bedienungsanleitung für -Kategorien-
7 August 2025
7 August 2025
7 August 2025
7 August 2025
7 August 2025
7 August 2025
7 August 2025
7 August 2025
7 August 2025
7 August 2025