Rane DC 24 Bedienungsanleitung
Rane
Nicht kategorisiert
DC 24
Lies die bedienungsanleitung für Rane DC 24 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 32 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 16.5 Bewertungen. Hast du eine Frage zu Rane DC 24 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4
Manual-1
DC 24
DYNAMIC CONTROLLER
OPERATORS MANUAL
DC 24 CONNECTION
Placing the DC 24 within the chain of events in your system
varies slightly depending on application. If you are assembling
a sound reinforcement system, the DC 24 would typically be
placed between the equalizer (you do use one, don’t you?) and
the active crossover, or the power amplifier if passive crossovers
(or the DC 24 crossover) are used.
In recording applications, the DC 24 may be used in con-
junction with insert loops on the mixing console or in series
with the outputs en route to the recorder. Most consoles allow
headphone monitoring of the processed signal if the device is
connected to the inserts. A most useful feature. If the DC 24 is
used on mixdown, it may be connected to the output of the mul
-
tichannel recorder or again on inserts of the mixdown console.
Many recording situations require that the DC 24 be con-
nected to the patch bay in the system so it may be easily moved
from one signal location to another. is call should be made
based upon the requirements of the application.
Wiring of this and all components should follow the Sound
System Interconnection RaneNote included in this manual. is
note details standard wiring conventions which should be used
to prevent noise and distortion. Also see the Chassis ground
point on page Manual-3.
QUICK START
Shredded, this document makes excellent packing material. In its present form, it makes interesting and useful reading. If you
run out of patience quickly, at least read this part to make sure you don’t exterminate everything in a two mile radius by doing some-
thing wrong.
In a nutshell, to use the DC 24 as a conventional dual channel compressor/limiter, ensure that the CROSSOVER ENGAGE
switch on the rear is in its position. Attach one or two channels of inputs and outputs to the respective connectors on the rear. out
With all , all the way and the controls in you have an expensive RATIOS down LIMITER THRESHOLD up LEVEL center-detent
patch cord. Make sure the BYPASS GATE COMPRESSOR switches are and set the out and for the desired ratios and thresholds.
Turning the down decreases the level at which limiting occurs. e LIMITER THRESHOLD GATES COMPRESSORS and may
both be activated by the source material applied to Channel 1 if the DUAL/SLAVE switch is pressed . is is a normal condition in
for true stereo program material.
To use the DC 24 's crossover bandsplit mode, be sure the rear panel switch is . Connect the input to CROSSOVER ENGAGE in
CH 1/CROSSOVER IN OUTPUTS SEPARATE. With the rear panel switch set to , split outputs are available at the CH 1/LOW
OUT CH 2/HIGH/COMBINE OUT OUTPUTS COMBINE CH 2/HIGH/COM- and jacks. With the switch at , use only the
BINE OUT jack for a mono sum of high and low channels.
NEVER CONNECT ANYTHING EXCEPT AN RS 1 OR OTHER APPROVED RANE AC POWER SUPPLY TO THE
THING THAT LOOKS LIKE A TELEPHONE JACK ON THE REAR OF THE DC 24. is is an AC input and requires some
special attention if you do not have an operational power supply like the one that was originally packed with your unit.EXACTLY
WEAR PARTS: is product contains no wear parts.
DC 24
THRESHOLD THRESHOLDRATIO THRESHOLD RATIO SIG LEVEL OL
BYPASS
MODE
FREQUENCY
POWER
COMPRESSOR CH 1 OUTPUTLIMITER CROSSOVER
GAIN
REDUCTION
THRESHOLD THRESHOLDRATIO THRESHOLD RATIO SIG LEVEL OL
BYPASS
GATE / EXPANDERGATE / EXPANDER COMPRESSOR CH 2 OUTPUTLIMITER
GAIN
REDUCTION
LOW
(:1) (:1)
SLAVE
DUAL
DYNAMIC
CONTROLLER
-50 10
-40
2
-30
-20
3
-10
1 1
01 10
8
64
7
5
1.1
4
1.2
1.4
1.6
2
3
-6
24
12
+6
0
6
3
-40
-30
-20
10
0
+12-12
+6-6
0
HIGH
(:1) (:1)
24
12
6
3
0
7k
200
70
100
75
90
150
125
400
2k
800
1.2k
+20-20
-6 +6
0
+20-20
-6 +6
0
+12-12
-10
20-48
2
3
1 1
0
8
64
7
5
-50 10
-40
-30
-20
0
-10
(:1)
1 1
0
1.1
4
1.2
1.4
1.6
2
3
-40
-30
-20
0
10
-10
20-48
6k
4k
0
0
Produktspezifikationen
| Marke: | Rane |
| Kategorie: | Nicht kategorisiert |
| Modell: | DC 24 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Rane DC 24 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Rane
7 Juli 2025
7 Juli 2025
7 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
Bedienungsanleitung Nicht kategorisiert
- Silvergear
- JML
- Gefen
- Twinkly
- Pyrex
- Pro-Ject
- DoughXpress
- Stop & Go
- Garrett
- Bēm Wireless
- Belulu
- RIDA
- TacTic
- Amaran
- J-Tech Digital
Neueste Bedienungsanleitung für -Kategorien-
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026