Rane MH 4 Bedienungsanleitung
Lies die bedienungsanleitung für Rane MH 4 (8 Seiten) kostenlos online; sie gehört zur Kategorie Mischer. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2 Bewertungen. Hast du eine Frage zu Rane MH 4 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8
Manual-1
OPERATORS MANUAL
QUICK START
Conect the output from any stereo source such as a mixer or tape deck, and plug the left and right inputs into the
respective INPUT jacks. The Inputs accept balanced or unbalanced sources. Just plug them in. This source is now routed to
each of the four Outputs.
For a single mono source feeding all headphones, connect it to either one of the INPUT jacks and engage the STEREO/
MONO switch. Set the CHANNEL LEVEL controls for individual headphone levels.
Never connect anything except a Rane power supply to the thing that looks like a telephone jack on the rear of the
unit. This is an AC input and requires special attention if you do not have a power supply exactly like the one originally
packed with your unit. See the full explanation of the power supply requirements elsewhere in this manual.
WEAR PARTS: This product contains no wear parts.
MH 4
HEADPHONE AMPLIFIER
Manual-2
STEREO/MONO switch
Converts the INPUTS from stereo to mono so
that a single input cable drives both sides of
the headphones. In some instances a
STEREO program may be confusing for live
monitoring purposes, and switching to MONO
improves intelligibility by summing the Left
and Right signals.
OVERLOAD indicators
The red LEDs light when the input signal
exceeds the MH 4’s output capability (3 dB
below maximum). Occasional flickering is
acceptable.The overload point automatically
varies with the headphones used.
Chassis ground point
A screw is supplied for chassis grounding
purposes. This unit comes with an outboard
power supply which does not ground the
chassis through the line cord. The MH 4 can
be grounded either to another chassis which
is earth grounded, or directly to the
grounding screw on an AC outlet cover by
means of a wire connected to this chassis
grounding screw.
Remote POWER supply input
The unit is supplied from the factory with a
Model RS 1 remote power supply suitable for
connection to this input jack. The power
requirements of the unit call for an 18 volt
AC center-tapped transformer only. This is
not a telephone jack. Never use a
power supply with your unit other than
the one supplied or a replacement
approved by Rane Corporation.
Using any
other type of supply may damage the unit
and void the warranty.
Produktspezifikationen
| Marke: | Rane |
| Kategorie: | Mischer |
| Modell: | MH 4 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Rane MH 4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Mischer Rane
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
Bedienungsanleitung Mischer
- Saturn
- OSD Audio
- G3 Ferrari
- Kogan
- Solis
- CRUX
- Zwilling
- Schneider
- Monacor
- Samson
- Magimix
- Bosch
- The T.mix
- BEKO
- Braun
Neueste Bedienungsanleitung für -Kategorien-
5 Juli 2025
25 Juni 2025
25 Juni 2025
25 Juni 2025
25 Juni 2025
23 Juni 2025
19 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025