Rane MC 22 Bedienungsanleitung

Lies die bedienungsanleitung für Rane MC 22 (11 Seiten) kostenlos online; sie gehört zur Kategorie Mischer. Dieses Handbuch wurde von 12 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 8 Bewertungen. Hast du eine Frage zu Rane MC 22 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Manual-1

OPERATORS MANUAL

QUICK START

Shredded, this document makes excellent packing material. In its present form, it makes interesting and useful reading.

If you run out of patience quickly, at least read this part to make sure you don’t exterminate everything within a two mile

radius by doing something wrong.

Attach one or two channels of inputs and outputs to the respective connectors on the rear.This device uses low imped-

ance balanced line drivers. Do not connect the XLR “+” or “–” output pins to ground, as this may cause the power supply

to shut down. For unbalanced use, leave the unused output pin (“+” or “–”) unterminated.

With the RATIOturned all the way downat 1:1, THRESHOLDturned all the way up to 20 dBu, and the LEVEL

controls in their center at 0 dB,you have an expensive patch cord.

While sending a signal to the MC 22, adjust the INPUT LEVEL so the +4 dBuLED lights occasionally, but the OL

LED does not light. Now increase the RATIO to something useful, like 2:1 (with the control set at 2, the Ratio is 2:1; at 5,

it is 5:1.) Adjust the THRESHOLD to the point you want the Compressor to kick in. The GAIN REDUCTIONmeter

reads the amount of signal compression.

Both Compressors will activate by the source material applied to either Channel if the LINK switch is ON. This is the

preferred setting for stereo program material.

WEAR PARTS:This product contains no wear parts.

MC 22

STEREO COMPRESSOR

Produktspezifikationen