Renzor WSA2BD Bedienungsanleitung

Lies die bedienungsanleitung für Renzor WSA2BD (1 Seiten) kostenlos online; sie gehört zur Kategorie Klimaanlage. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 3 Bewertungen. Hast du eine Frage zu Renzor WSA2BD oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

SPLIT SYSTEM AIR CONDITIONER

*SA(1,2)BD4M1 SERIES - (S,R)N18K, (S,R)N24K, (S,R)N30K, (S,R)N36K, SN42K, SN48K, &

SN60K (1.5, 2, 2.5, 3, 3.5, 4, & 5 TON) - SINGLE PHASE MODELS

13 SEER

INSTALLATION INSTRUCTIONS

IMPORTANT

ATTENTION INSTALLERS:

It is your responsibility to know this product better than your customer. This includes being able to install the product

according to strict safety guidelines and instructing the customer on how to operate and maintain the equipment for

the life of the product. Safety should always be the deciding factor when installing this product and using common

sense plays an important role as well. Pay attention to all safety warnings and any other special notes highlighted in

the manual. Improper installation of the unit or failure to follow safety warnings could result in serious injury, death,

or property damage.

These instructions are primarily intended to assist qualified individuals experienced in the proper installation of this

appliance. Some local codes require licensed installation/service personnel for this type of equipment. Please read all

instructions carefully before starting the installation. Return these instructions to the customer’s package for future

reference.

DO NOT DESTROY. PLEASE READ CAREFULLY & KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

IMPORTANT SAFETY INFORMATION ..................2

AIR CONDITIONER INSTALLATION .....................3

General Information ...............................................3

Before You Install this Unit .....................................3

Locating the Air Conditioner ...................................3

Packaging Removal ...............................................3

Ground Level .........................................................3

Roof Mount ............................................................3

Connecting Refrigerant Tubing Between the

Indoor & Outdoor Unit ............................................4

ELECTRICAL WIRING ...........................................4

Pre-Electrical Checklist ..........................................4

Line Voltage ...........................................................4

Grounding ..............................................................5

Comfort Alert

TM

Diagnostics Module ......................5

(Select Models Only) ..............................................5

24 VAC Power Wiring ..........................................5

Thermostat Demand Wiring .................................5

Interpreting the Diagnostic LED’s ........................5

LED Description ...................................................5

Thermostat Connections ........................................6

AIR CONDITIONER MAINTENANCE .....................6

Panel Removal .......................................................6

Panel Installation ....................................................6

START UP & ADJUSTMENTS ...............................7

Pre-Start Check List ...............................................7

Start-Up Procedures ..............................................7

Air Circulation - Indoor Blower .............................7

System Cooling ....................................................7

System Heating (optional) ...................................7

REFRIGERANT CHARGING ..................................7

Charging the Unit in AC mode ...............................8

If the outdoor temperature is 65 degrees F

or higher: ..............................................................8

If the outdoor temperature is below 65

degrees F: ............................................................8

ELECTRICAL DIAGRAMS & TABLES ..................9

Figure 5. Wiring Diagram for *SA(1,2)BD4M

(1.5, 2, 2.5, 3, 3.5, 4, & 5 Ton Units) ....9

Figure 6. Wiring Diagram for *SA(1,2)BD4M1RN

(1.5, 2, 2.5, & 3 Ton Units) ....................10

Table 1. Comfort Alert LED Diagnostics ..............11

Table 2. Module Wiring Troubleshooting .............12

INSTALLATION CHECKLIST .................................16

REPLACEMENT PARTS ........................................16

Produktspezifikationen