Renzor WSA2BE Bedienungsanleitung

Lies die bedienungsanleitung für Renzor WSA2BE (16 Seiten) kostenlos online; sie gehört zur Kategorie Klimaanlage. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 9 Bewertungen. Hast du eine Frage zu Renzor WSA2BE oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

SPLIT SYSTEM AIR CONDITIONER

*SA(1,2)BE4M1 - (S,R)N18K, (S,R)N24K, (S,R)N30K, (S,R)N36K, SN42K, SN48K, & SN60K

(1.5, 2, 2.5, 3, 3.5, 4, & 5 TON) SERIES - SINGLE PHASE MODELS

14 SEER

IMPORTANT

ATTENTION INSTALLERS:

It is your responsibility to know this product

better than your customer. This includes

being able to install the product according

to strict safety guidelines and instructing the

customer on how to operate and maintain the

equipment for the life of the product. Safety

should always be the deciding factor when

installing this product and using common

sense plays an important role as well. Pay

attention to all safety warnings and any other

special notes highlighted in the manual.

Improper installation of the unit or failure to

follow safety warnings could result in serious

injury, death, or property damage.

These instructions are primarily intended to

assist qualified individuals experienced in the

proper installation of this appliance. Some

local codes require licensed installation/

service personnel for this type of equipment.

Please read all instructions carefully before

starting the installation. Return these

instructions to the customer’s package for

future reference.

DO NOT DESTROY. PLEASE READ CAREFULLY &

KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

INSTALLATION INSTRUCTIONS

IMPORTANT SAFETY INFORMATION ..................2

AIR CONDITIONER INSTALLATION .....................2

General Information ...............................................2

Before You Install this Unit .....................................2

Locating the Air Conditioner ...................................3

Packaging Removal ...............................................3

Ground Level .........................................................3

Roof Mount ............................................................3

Connecting Refrigerant Tubing Between the

Indoor & Outdoor Unit ............................................3

ELECTRICAL WIRING ...........................................4

Pre-Electrical Checklist ..........................................4

Line Voltage ...........................................................4

Grounding ..............................................................4

CoreSense

TM

Diagnostics Module ..........................4

Compressor Protection ........................................4

Resetting Alert Codes ..........................................5

Thermostat Connections ........................................5

START UP & ADJUSTMENTS ...............................5

Pre-Start Check List ...............................................5

Start-Up Procedures ..............................................5

Air Circulation - Indoor Blower .............................5

System Cooling ....................................................5

System Heating (optional) ...................................5

AIR CONDITIONER MAINTENANCE .....................6

Panel Removal .......................................................6

Panel Installation ....................................................6

REFRIGERANT CHARGING ..................................6

Charging the Unit in AC mode ...............................7

If the outdoor temperature is 65 degrees F or

higher: ..................................................................7

If the outdoor temperature is below 65

degrees F: ............................................................7

ELECTRICAL INFORMATION ...............................8

Table 1. CoreSense

TM

LED Diagnostics ..............8

Figure 5. Wiring Diagram for *SA(1,2)BE4M1RN

(1.5, 2, 2.5, & 3 Ton Units Without

CoreSense

TM

) .......................................8

Figure 6. Wiring Diagram for *SA(1,2)BE4M1SN

(1.5, 2, 2.5, 3, 3.5, & 4 Ton Units

Without CoreSense

TM

) ..........................9

Figure 7. Wiring Diagram for *SA(1,2)BE4M1SN

1.5, 2, 2.5, 3, 3.5, & 4 Ton Units With

Low Pressure Switch and

Without CoreSense

TM

) ..........................10

Figure 8. Wiring Diagram for *SA(1,2)BE4M1SN

(1.5, 2, 2.5, 3, 3.5, & 4 Ton Units With

Low Pressure Switch and With

CoreSense

TM

) .......................................11

Figure 9. Wiring Diagram for 5 Ton Models

(without CoreSense

TM

) .........................12

Figure 10. Wiring Diagram for 5 Ton Models

(with CoreSense

TM

) ............................13

INSTALLATION CHECKLIST .................................16

REPLACEMENT PARTS ........................................16

Produktspezifikationen