RetroSound Dallas M2B Bedienungsanleitung

Lies die bedienungsanleitung für RetroSound Dallas M2B (2 Seiten) kostenlos online; sie gehört zur Kategorie Autoradio. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 13.5 Bewertungen. Hast du eine Frage zu RetroSound Dallas M2B oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

F

G

H

E

E

L

O

O

K

F

O

R

T

H

E

O

R

A

N

G

E

B

A

G

!

R

A

D

I

O

F

A

C

E

S

C

R

E

W

S

x(2)

Radio Face Quick Start Guide

What’s in the BoxInstallation

Dallas Face

ShaftsAdapters

Knobs

Brackets

x(2)

x(2)

x(4)

x(2)

Hardware

Modern Sound For Your Classic

[email protected] | help.retromanufacturing.com

Refer to the user manual included in your motor box or on our website for more comprehensive instructions.

Plug the ribbon cable from the Radio Motor

into the Radio Face.

Place a small metal spacer on each

control shaft and secure with a shaft nut.

Slide the shafts through the Radio Face

with the shaft’s cord facing out. Plug the

control shafts into the Radio Motor.

NOTE: Use either brackets

J or K as needed.

Place the small black plastic washer and the thin

metal washer onto the shaft, and secure with

the shaft nut using a deep-well socket. DO NOT

OVERTIGHTEN. Finish the assembly by installing

the front and rear knobs.

Install the mounting brackets with

the radio facing you. Attach the

bracket labeled R to the right side

and the bracket labeled L to the

left side. Line up tabs and use

supplied screws to secure the

brackets to the Radio Face.

To use the optional wiring adapters(L)

(if the vehicle has a compatible factory

harness intact), plug the adapters into the

factory wiring harness and match the wiring

color to the color on the adapter that came

with the Radio Motor. Not all wires may be

needed, cap off any unused wires that do

not match the factory harness.

Attach the Radio Face to the Radio Motor using

the four small screws from the orange bag

found in your Radio Face box.

x(2)

x(2)

Note: Use either brackets J

or K as needed.

Note: Not used

for all installations.

x(2)

x(2)

A

A

J

JJ

BC

K

L

D

D

D

I

I

GH

B

C

x(4)

F

x(4)

E

F

Produktspezifikationen