Robert Abbey 463 Bedienungsanleitung

Lies die bedienungsanleitung für Robert Abbey 463 (1 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 7 Bewertungen. Hast du eine Frage zu Robert Abbey 463 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

ASSEMBLY INSTRUCTIONS FOR YOUR

KOLEMAN CLUB FLOOR LAMP

463

ASSEMBLY INSTRUCTIONS:

NOTE: Do not connect electricity until lamp is fully assembled.

1. Unpack all parts and place them on a level surface.

2. Align column (G) with base (H). Pull cord taught from below base (H) to prevent damage to the wire. Thread column (G) onto

threaded tube (I).

3. Remove ange (A) from threaded socket (C).

4. Place shade (B) onto threaded socket (C).

5. Thread ange (A) onto socket (C) to secure shade to xture.

6. Install one 100W Max. Type A, medium base bulb into socket.

7. Remove protective plastic (K) from polarized plug (J). Insert polarized plug (J) into wall outlet.

8. To adjust height of lamp loosen turn knob (F). Carefully slide arm (E) into desired position. Tighten knob (F) to secure position of

arm (E).

9. Use switch (D) to control power to lamp.

**To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners.**

IMPORTANT SAFETY INSTRUCTIONS:

* This lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will t

in a polarized outlet only one way. If it does not t fully in the outlet, reverse the plug. If it still does not t, contact a qualied

electrician. Do NOT alter the plug.

* Do not use with an extension cord unless the plug from the lamp can be fully inserted into the extension cord receptical.

* Switch power off and remove plug from the wall outlet before replacing the bulb.

(A)

(B)

(C)

(D)

(E)

(F)

(G)

(H)

(I)

(J)

(K)

Produktspezifikationen