Roland FC-300 Bedienungsanleitung
Seiten 6 Engels Hi-Fi-Anlage
Lies die Bedienungsanleitung für Roland FC-300 kostenlos online oder lade das PDF herunter. 32 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
1
FC-300, GT-PRO
Using the FC-300 and GT-PRO in Combination
What You Can Do with the FC-300 and GT-PRO in Combination
You can accomplish GT-PRO patch changes.
After you’ve finished doing the tasks in “Making the Settings for the FC-300 (Getting Ready for Use In Combination),” read “Switching GT-
PRO Patches on the FC-300” (p. 2).
You can carry out GT-PRO Manual Mode operations.
After you’ve finished doing the tasks in “Making the Settings for the FC-300 (Getting Ready for Use In Combination),” read “Switching the
Effect On and Off with the FC-300’s Pedals (Manual Mode)” (p. 4).
You can control the GT-PRO using the FC-300’s CTL and EXP pedals.
Read “Controlling the GT-PRO with the FC-300’s CTL/EXP Pedal” (p. 6).
Making the Settings for the FC-300 (Getting Ready for Use In
Combination)
Limiting the Range of Banks That Can Be Switched (Bank Extent)
1. In the FC-300’s top screen, press [UTILITY].
2. Press PARAMETER [] [] to display the following screen.
3. Press VALUE [▼] [▲] to select “EFFECTS.”
4. Press PARAMETER [] [] to display the following screen.
5. Press VALUE [▼] [▲] to make the setting for 1 through 40.
Sets the upper limit for banks that can be switched when banks are specified with the FC-300’s [▼] [▲] pedals.
6. Press [EXIT] to return to the top screen.
Setting the Timing for Switching Patches (Bank Change Mode)
1. In the FC-300’s top screen, press [UTILITY].
2. Press PARAMETER [] [] to display the following screen.
3. Press VALUE [▼] [▲] to specify the parameter.
4. Press [EXIT] to return to the top screen.
SYS:PC Mode
‚ EFFECTS„
SYS:Bank Extent
‚ 40„
SYS:Bnk Chg Mode
‚ IMMEDIATE„
Parameter Explanation
IMMEDIATEProgram changes are transmitted immediately when [▼] [▲] or each number pedals are pressed.
Example) When starting from “003,” pressing [▲] simultaneously transmits PC#8.
WAIT FOR A NUMProgram changes are transmitted when a number pedal is pressed after [▼] or [▲] is pressed.
Example) Starting from “003,” after [▲] is pressed and all of the green number pedal indicators
are flashing, pressing number pedal 8 outputs PC#8.
©2008 BOSS CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written
permission of BOSS CORPORATION.
Produktspezifikationen
| Marke: | Roland |
| Kategorie: | Hi-Fi-Anlage |
| Modell: | FC-300 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Roland FC-300 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Hi-Fi-Anlage Roland
Roland CM-64 Bedienungsanleitung Roland FR-7X Bedienungsanleitung Roland MT-90U Bedienungsanleitung Roland Integra-7 Sound Module Bedienungsanleitung Roland DIF-AT24 Bedienungsanleitung Roland Music Creator Bedienungsanleitung Roland BA-330 Bedienungsanleitung Roland DB-60 Bedienungsanleitung
Alle Roland Hi-Fi-Anlage Bedienungsanleitungen
Beliebt in Hi-Fi-Anlage
Roland PCR-500 Bedienungsanleitung Roland FR-1X Bedienungsanleitung Roland Octa-Capture UA-1010 Bedienungsanleitung
Bedienungsanleitung Hi-Fi-Anlage
Neueste Bedienungsanleitungen für Hi-Fi-Anlage
DVDO -AA2x20W-1 Bedienungsanleitung DVDO -AA2x50W-1 Bedienungsanleitung Gemini GLS-550 Bedienungsanleitung Medion LIFE P61768 (MD 43768) Bedienungsanleitung Pro-Ject CD Box RS2 Tube Bedienungsanleitung Fantech ORBITA WHG07 Bedienungsanleitung FiiO M33 Bedienungsanleitung FiiO DISC Bedienungsanleitung Medion S66822 (MD 44822) Bedienungsanleitung Essentiel B EBMSBTH01 Bedienungsanleitung