Salus SQ610RF Bedienungsanleitung
Salus
Thermostat
SQ610RF
Lies die bedienungsanleitung für Salus SQ610RF (52 Seiten) kostenlos online; sie gehört zur Kategorie Thermostat. Dieses Handbuch wurde von 12 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 6.5 Bewertungen. Hast du eine Frage zu Salus SQ610RF oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/52
2
Introduction
The SQ610RF Quantum is a ZigBee temperature controller for wireless control of iT600 series devices, such as
the KL08RF wiring centre, mini TRV head, RX10RF boiler control module.
In order to control SQ610RF over the Internet or via the SALUS Smart Home mobile app (ONLINE mode),
it must be installed together with the UGE600 Internet gateway (sold separately). From the application level,
it is possible to pair SQ610RF with other system elements, e.g. Smart Plug SPE600, Smart Relay SR600 or
window/door sensor OS600/SW600.
SQ610RF can be used locally without an Internet connection , however, it’s communication(OFFLINE mode)
with other devices must be done using the CO10RF coordinator (sold separately).
Full manual in PDF format is available at www.salus-controls.eu site.
Use in accordance to national and EU regulations. Use the device as intended, keeping it in dry condition. Product for
indoor use only. Installation must be carried out by a qualied person in accordance to national and EU regulations.
Disconnect your equipment before cleaning it with a dry cloth.
Product Compliance
Safety Information
This product complies with the essential requirements and other relevant provisions of Directives 2014/30/ EU,
2014/35/EU, 2014/53/EU and 2011/65/EU. The full text of the EU Declaration of Conformity is available at the
following internet address: www.saluslegal.com.
Package Content:
1) SQ610RF Quantum Thermostat
2) Wall mounting plate
3) Self-adhesive mounting tape
4) Mounting screws
5) Manual instruction
3
Français DeutschNederlands English
Before you start:
Charging to full battery level may take up to
24h maximum.
New SQ610RF Quantum Thermostat is partially
charged, however, we recommend you to fully
charge the battery before use.
Connect charger to micro-USB Port which is at
the bottom of SQ610RF Quantum Thermostat to
charge the device.
Wiring diagram (S1, S2 Input)
Symbols explanation:
S – volt-free contact
T – temperature sensor
S1,S2 Terminals:
- air or oor temperature sensor
- external volt-free contact to connect any
ON/OFF switch or occupancy sensor (Hotel card)
Mounting: to mount thermostat you can use
included accesories (mounting screws or
self-adhesive tape). Remove back cover
to mount the plate to the wall. After this just
attach thermostat to the plate (it has built-in
magnet).
Please note:
The ideal position to thermostat mounting is about
1,5m under oor level far from heating or cooling
sources. Thermostat can’t be exposed to sunlight
or any extreme conditions like for example draft.
1 2
3
S1
S2
T
S
Produktspezifikationen
| Marke: | Salus |
| Kategorie: | Thermostat |
| Modell: | SQ610RF |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Salus SQ610RF benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Thermostat Salus
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
25 Juli 2025
24 Juli 2025
23 Juli 2025
23 Juli 2025
23 Juli 2025
23 Juli 2025
Bedienungsanleitung Thermostat
- Heatmiser
- Oregon Scientific
- Wachendorff
- Tesla
- Warmup
- De Dietrich
- Elco
- EMOS
- AVM
- Magnum
- Xavax
- Elektrobock
- Heimeier
- 2Heat
Neueste Bedienungsanleitung für -Kategorien-
31 Juli 2025
30 Juli 2025
28 Juli 2025
27 Juli 2025
27 Juli 2025
26 Juli 2025
24 Juli 2025
24 Juli 2025
24 Juli 2025