Sensirion STC31 Bedienungsanleitung


Seiten 3 Gasdetektor

Lies die Bedienungsanleitung für Sensirion STC31 kostenlos online oder lade das PDF herunter. Diese Anleitung wurde 0 Mal aufgerufen. Frage zu diesem Modell? Stelle eine Frage

www.sensirion.com 1/3 Version 2 June 20241.–
Handling and Assembly Instruction
F Sensirion STC Thermal Conductivity Sensor or’s
Preface
for high volume applications. It is therefore compatible with
standard assembly and soldering processes. Nevertheless,
operation of the sensors after assembly. This document
contains information on the handling and assembly of
environment.
1Applicability
This document is applicable to all Sensirion STC thermal
conductivity sensors.
2ESD protection
The sensor shall be protected from ESD (Electrostatic
Discharge) and only be handled in ESD protected areas
personnel with wrist-straps, ground all non-insulating and
conductive objects, exclude insulating materials from the
Protect sensors outside the EPA using ESD protective
packaging.
Figure 1Protection against ESD is mandatory.
3Pick & place process
Standard pick & place equipment for QFN packages may
be used for handling. The upper part of the sensor, where
mechanical impact and any contact must be prevented.
must be avoided. The lower 1.6 mm of the sensor surface
is intended for pick & place (see Figure 2)The tool surface .
touching the module in the pick area should be flat and
smooth. Pick & place forces should not exceed 4N.
Figure 2Area of the sensor suitable for application of force during
mounting process is indicated with dashed lines. All dimensions
are in mm .
4Water & dust protection membrane
The STC sensor is equipped with a water and dust
protection membrane that is directly attached to the sensor.
Figure 3) and thus acts as a shield against pollution from
spray water and dust. The membrane is completely
permeable to all target gases the STC is intended to
measure. Therefore, the water and dust protection
membrane must not be removed, damaged or altered in any
way to ensure reliable operation of the STC sensor.
Figure 3 The dust protection membrane completely covers the
STC sensor surface.

Bewerten Sie dieses Handbuch


Produktspezifikationen

Marke: Sensirion
Kategorie: Gasdetektor
Modell: STC31

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sensirion STC31 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten