SkyRC e3 Duo Bedienungsanleitung
Lies die bedienungsanleitung für SkyRC e3 Duo (3 Seiten) kostenlos online; sie gehört zur Kategorie Ladegerät. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 2 Bewertungen. Hast du eine Frage zu SkyRC e3 Duo oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/3
INTRODUCTION
OPERATION
Select the proper charging current 0.5A/1A/1.5A/2.2A by pressing the circular button.
Please refer to following steps to charge the battery.
4)
The charger starts charging. The charge status LED will glow to indicate charging is in progress.
5)
- 1 - - 2 -
INSTRUCTION MANUAL
SK-100164
Multi Chemistry Charger
Example:
LiPo cell of 2200mAh Capacity; 1C=2200mA
(=2.2A) charge current. You can choose 2.2A
current to charge the battery.
ERROR MESSAGE
SPECIFICATION
2S Balance Port
Battery Type Indicator
Charge Current or Capacity Indicator
Select Charge Current or
Start Charge Processes
Select Battery Type
- 3 -
3S Balance Port
Select Battery Type
Select Charging Current
All LEDs flash white ONCE and stop 2 seconds in
cycle
All LEDs flash white TWICE and stop 2 seconds in
cycle
All LEDs flash white THREE TIMES and stop 2
seconds in cycle
ProblemLED Blinking Times
The charging time is longer than 120min
Voltage of one cell in the battery pack is too low
Voltage of one cell in the battery pack is too high
AC Input
Battery Type
Cell Count
Charge Current
Cell Terminate Voltage
Circuit Power
Current Drain for Balancing
Dimension
Weight
100-240V
LiPo/LiFe/LiHV
2-3 CELLS
0.5A/1A/1.5A/2.2A
LiPo: 4.2V ± 0.02V / LiFe: 3.6V ± 0.02V
LiHV: 4.35V ± 0.02V
20Wx2
Max. 200mA
108x76x50mm
500g
Thank you for your choice of the SKYRC e3 Duo, 100-240V AC balance charger. This unit is simple to use
but its operation does require some knowledge on the part of the user. Please read this entire operating
manual completely and attentively before using this product, as it covers a wide range of information on
operating and safety.
SKYRC e3 Duo Charger is an economic, high quality 100-240V AC balance charger, designed for
charging LiPo, LiFe and LiHV batteries from 2-3 cells in balance mode. The circuit power is 20W for each
channel and max charge current can reach to 2.2A. There are four kinds of charge current
0.5A/1A/1.5A/2.2A that can be selected. You could select the proper charge current according to battery
capacity.
SKYRC e3 Duo comes with the built in power supply. You can connect the AC power cord to the AC
socket (100-240V AC) directly.
Insert the AC power cord into the charger.
1)
2)
3)
Insert the AC cord into a wall socket (100-240V).
All LEDS will light for one second, then battery
type LED(default LiPo) and the charge current
LED(default 1A) will glow constant white.
Connect battery balance wire to balance port
which is in front side of the charger, select the
battery type LiPo/LiFe/LiHV by press “BATT”
button.
The recommended charge rate is 1C (battery
capacity = charge current). 1C means: capacity
value = charge current.
EXPLAINATION OF LED STATUS
Capacity＜25% 25% capacity indictor LED flashing
25%≤Capacity＜50% 50% capacity indictor LED flashing
50%≤Capacity＜75% 75% capacity indictor LED flashing
75%≤Capacity＜100% 100% capacity indictor LED flashing
0.5A Flashes white ONCE and stop 1 second in cycle.
1.0A Flashes white TWICE and stop 1 second in cycle.
1.5A Flashes white THREE TIMES and stop 1 second in cycle.
2.2A Flashes white FOUR TIMES and stop 1 second in cycle.
Remark:
The capacity indicator LED flash �mes shows the charge current you set.
When the battery is fully charged, the charge status LED will glow constant WHITE. Unplug the
battery from the charger and press the circular button once, the charger will be ready to charge
another battery.
6) During the charging process, if you want to stop charging, press the circular button once.
If the charger encounters a problem, all LEDs will flash white to alert you the errors. In this case,
please disconnect the power cord from the wall socket and unplug the battery from the charger.
CAUTION:
TO 100-240V AC
Socket
This diagram shows the correct way to
connect your battery to the e3 Duo
charger while charging in balance mode.
Produktspezifikationen
| Marke: | SkyRC |
| Kategorie: | Ladegerät |
| Modell: | e3 Duo |
Brauchst du Hilfe?
Wenn Sie Hilfe mit SkyRC e3 Duo benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Ladegerät SkyRC
20 Januar 2026
16 Dezember 2025
16 Dezember 2025
16 Dezember 2025
16 Dezember 2025
15 Dezember 2025
15 Dezember 2025
15 Dezember 2025
15 Dezember 2025
15 Dezember 2025
Bedienungsanleitung Ladegerät
- Defender
- Oukitel
- Ergotron
- AXITEC
- Ridgid
- Davis
- Arendo
- Kärcher
- AccuPower
- V2C
- IEB
- Snooper
- Digipower
- Lenmar
- Shimano
Neueste Bedienungsanleitung für -Kategorien-
11 Januar 2026
10 Januar 2026
10 Januar 2026
6 Januar 2026
4 Januar 2026
4 Januar 2026
2 Januar 2026
30 Dezember 2026
30 Dezember 2026
8 Dezember 2025