Sony HXCU-TX70 Bedienungsanleitung
Sony
Nicht kategorisiert
HXCU-TX70
Lies die bedienungsanleitung für Sony HXCU-TX70 (32 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 9 Bewertungen. Hast du eine Frage zu Sony HXCU-TX70 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/32
HD Camera Control Unit
Operating Instructions
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
HXCU-TX70
4-479-642-11 (1)
© 2013 Sony Corporation
2Table of Contents
Table of Contents
Overview .................................................................... 3
Features .......................................................................... 3
System Configuration Example ...................................... 5
Locations and Functions of Parts ........................... 6
Front Panel ..................................................................... 6
Rear Panel ...................................................................... 7
HKCU-FP2 CCU Control Panel (Optional) ..................... 9
Status Display ......................................................... 11
Displaying the Status Screen ........................................ 11
Status Display Screen .................................................. 11
Setup Menu.............................................................. 14
Changing Menu Item Settings ...................................... 14
Menu Tree .................................................................... 16
Menu List ...................................................................... 18
Appendix.................................................................. 28
Notes on Use ................................................................ 28
Digital Triax Transmission ............................................ 28
Error messages ............................................................ 29
License Declarations .................................................... 29
Specifications ................................................................ 29
3
Overview
Overview
The HXCU-TX70 HD Camera Control Unit (CCU) connects to
the CA-TX70 HD Camera Adaptor that is attached to the
HXC-D70 HD Color Camera or PMW-500/400/350/320 Solid-
State Memory Camcorder.
It performs signal processing, provides an interface for
external equipment, and supplies power to the camera.
The CCU can be combined with an RCP-1000-series Remote
Control Panel (optional) to form a camera control system.
Features
Multi-system input/output interface
The CCU is equipped with the following input and output signal
connectors as standard equipment.
Video outputs
• SDI (main), 2-system (HD/SD selectable, embedded digital
audio)
• SDI (monitor), 2-system (HD/SD selectable, embedded
digital audio, superimposed character and marker display)
• Analog composite (VBS 2-system, PIX 1-system,
SYNC/WF 1-system)
• Analog component, 1-system (HD Y/Pb/Pr, HD R/G/B, SD
Y/R-Y/B-Y, SD R/G/B 4-format selectable)
• SYNC/WF 1-system (HD/SD selectable)
The analog composite (WF1 system) and SYNC1 system share a
single connector.
Video inputs
• Reference input (HD/SD support)
• SDI return input, 2-system (HD/SD selectable)
• VBS return input, 2-system
• VBS prompter input, 2-system
Audio input/outputs
• Microphone (analog) output, 2-system (XLR-3-pin)
• Intercom input/output, 2-system (D-sub 25-pin)
• PGM (program audio) input, 2-system (D-sub 25-pin)
Other input/outputs
• Tally (R/G) (D-sub 25-pin)
• Microphone remote (D-sub 25-pin)
• WF (waveform monitor) remote output (D-sub 25-pin)
• WF (waveform monitor) mode output (D-sub 25-pin)
• Trunk (D-sub 25-pin)
• REMOTE (8-pin)
• LAN (RJ-45, 8-pin)
The WF remote output, WF mode output, trunk, and microphone
remote share a common 25-pin connector.
External sync signals
The CCU can be locked to an external sync signal. Either an
HD tri-level sync signal or an SD sync (black burst) signal can
be used as the sync signal.
Digital Triax Transmission
The CCU and camera are connected using the industry-
standard double-shielded triaxial camera cable (commonly
referred to as triax). The camera and CCU are equipped with
the latest Sony-developed digital transmission technology
which can transmit high-resolution pictures between the
camera and CCU.
Built-in down converter
HD signals from the camera can be converted to high-
resolution SD component SDI output signals using the
wideband down converter. The output signal aspect ratio can
be set to 4:3 edge crop, 16:9 squeeze, or letterbox. The down
converted SD signal has independent image enhancement,
gamma, and matrix functions that can be controlled externally.
Built-in simplified up converter
SD signal return video is displayed in the HD viewfinder using
a simple up converter. The return video aspect ratio can be set
to 4:3 edge crop, 16:9 squeeze, or letterbox.
Electric shock prevention
A safety function cuts the high-voltage supply from the CCU if
the connection to the camera becomes unsafe.
When power is applied, low-voltage power is first supplied to
the camera. After the connected camera is correctly identified
using tone signal detection, the regular DC180 V high-voltage
power is supplied to the camera. Power is not supplied to
cameras not connected via a dedicated camera connection
cable.
Alarm indicators are also fitted to indicate cable open-circuit
and short-circuit conditions.
Wide range of audio functions
The CCU is fitted with two-channel microphone output, video
signals with embedded audio, and PGM (program) audio
input/output connectors. It also features an intercom system
with two independent channels, and supports four-wire and
RTS/Clear-Com intercom systems.
For information on support for RTS/Clear-Com systems,
contact a Sony service or sales representative.
Microphone volume control
The camera’s microphone volume can be controlled via the
MIC REMOTE connector.
Character monitor signal output
The self-diagnosis status screens and setup menu can be
output as a text character display on the video output signal.
See “Video outputs” on page 3.
Rack mountable
The CCU can be installed in a standard EIA 19-inch rack. The
height of the unit is 1.5U.
Note
Note
Produktspezifikationen
| Marke: | Sony |
| Kategorie: | Nicht kategorisiert |
| Modell: | HXCU-TX70 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Sony HXCU-TX70 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Sony
26 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
22 Juli 2025
22 Juli 2025
16 Juli 2025
14 Juli 2025
14 Juli 2025
Bedienungsanleitung Nicht kategorisiert
- CFH
- NZXT
- Intermatic
- Sacrament
- Childhome
- Muller
- Bracketron
- Maxview
- Nemef
- Concept
- Line 6
- Bitspower
- Alpen Kreuzer
- QJ
- Full Boar
Neueste Bedienungsanleitung für -Kategorien-
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025