Speco Technologies CVC-647TP Bedienungsanleitung
Speco Technologies
Sicherheitskamera
CVC-647TP
Lies die bedienungsanleitung für Speco Technologies CVC-647TP (4 Seiten) kostenlos online; sie gehört zur Kategorie Sicherheitskamera. Dieses Handbuch wurde von 44 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 22.5 Bewertungen. Hast du eine Frage zu Speco Technologies CVC-647TP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4
P. 1
CVC-647TP
Vandal Resistant Dome
Camera Instructions
CONTENTS
Page Page
1. DESCRIPTION……… ........ 1
2. INSTALLATION………… .... 2
3.WIRING INSTRUCTIONS ... 3
4. SPECIFICATIONS .............. 4
1. DESCRIPTION
Thank you very much for purchasing our product.
This Tamper Resistant Color Dome Camera uses a SONY Super-HAD
CCD Image Sensor and solid-state circuitry, which provides long life and
high reliability. This CVC-647TP offers excellent image quality with low
lag and high burn resistance, and is not subject to distortions from
magnetic fields. Highly resistant to shock and vibration, and easy to install,
this Camera is a very good choice for your CCTV system.
P. 2
2. INSTALLATION
STEP 1: Please select the most suitable position on the ceiling to install
the camera.
STEP 2: Remove the locking screw and rotate the dome housing
counterclockwise to remove it from the mounting base (as shown
by the figure below).
Mount i ng Bas e
DOME Hous i ng
OR
STEP 3: Hold the mounting base against the ceiling and center it over the
cable hole. Attach to the ceiling using the four screws supplied in
the accessory package (shown by the figure below).
Then allow the cable connectors to pass through the cable entry
hole made available for that purpose (shown by figure below).
STEP 4: Set the proper image angle by adjusting the camera body.
When the camera angle adjustment has been completed, rotate the
dome housing clockwise to secure it to the mounting base.
STEP 5: Lock the dome cover into position using the Locking screw.
3. WIRING INSTRUCTIONS
STEP 1: Connect a coaxial cable between the camera and the monitor
using a 75-Ohm coaxial cable with 95% copper shielding.
STEP 2: Plug the Power Adapter into an AC socket and the DC plug into
the DC Jack of the camera. Please note that the center pin is
positive (+).
TO MONI T O R
TO DC POWER SOURCE
P. 3
Produktspezifikationen
| Marke: | Speco Technologies |
| Kategorie: | Sicherheitskamera |
| Modell: | CVC-647TP |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Speco Technologies CVC-647TP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Sicherheitskamera Speco Technologies
8 Juni 2025
6 Juni 2025
14 August 2024
26 Mai 2024
26 Mai 2024
22 Mai 2024
21 Mai 2024
19 Mai 2024
16 Mai 2024
Bedienungsanleitung Sicherheitskamera
- ACTi
- Vitek
- B/R/K
- Eufy
- Sonoff
- Aluratek
- Zebra
- Cisco
- Qoltec
- INSTAR
- Epiphan
- Kramer
- SereneLife
- Vtech
- KJB Security Products
Neueste Bedienungsanleitung für -Kategorien-
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
14 Juni 2025
14 Juni 2025