Speco Technologies Intensifier O6FD4M Bedienungsanleitung
Speco Technologies
Sicherheitskamera
Intensifier O6FD4M
Lies die bedienungsanleitung für Speco Technologies Intensifier O6FD4M (26 Seiten) kostenlos online; sie gehört zur Kategorie Sicherheitskamera. Dieses Handbuch wurde von 29 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 15 Bewertungen. Hast du eine Frage zu Speco Technologies Intensifier O6FD4M oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/26
IP Camera User Manual
O8FB7M /O8FD4M
O6FB7M /O6FD4M
Please read this manual carefully before operating the unit and keep it for further reference.
2
Welcome
Thank you for purchasing this network camera!
This owner’s manual is designed to be a reference tool for your system.
Please read this manual carefully before operating the unit and retain it for future reference.
Should you require any technical assistance, contact Speco Technologies Tech Support at 1- -645-5516800
Important Safeguards and Warnings
1 Electrical safety
．
．
．
．．
All installation and operation here should conform to local electrical safety codes.
Use a certified/listed 12VDC Class 2 power supply only.
Please note: Do not connect two power supplying sources to the device at the same time; it may result in device
damage! The product must be grounded to reduce the risk of electric shock.
Improper handling and/or installation could run the risk of re or electrical shock.
2 Environment
．
．
．
．．
Heavy stress, violent vibration or exposure to water is not allowed during transportation, storage and installation.
This product should be installed in a cool, dry place away from direct sunlight and heat sources.
Do not install the product in extreme temperature conditions.
Do not expose the camera to electromagnetic radiation. Otherwise it may result in CMOS sensor failure.
Do not block any ventilation openings.
Do not allow water and liquid intrusion into the camera.
3. Operation and Daily Maintenance
Please shut down the device and then unplug the power cable before you begin any maintenance work.
Do not touch the CMOS sensor optic component. You can use a blower to clean the dust on the lens surface.
Always use the dry soft cloth to clean the device. If there is too much dust, use a cloth dampened with a small quantity of
neutral detergent. Finally use the dry cloth to clean the device.
Please use a professional optical cleaning method to clean the enclosure. Improper enclosure cleaning (such as using cloth)
may result in poor IR functionality and/or IR reection.
The grounding holes of the product are recommended to be grounded to further enhance the reliability of the camera.
Dome cover is an optical device, please don’t touch or wipe cover surface directly during installation and use, please refer to
the following methods if dirt is found:
Stained with dirt: Use oil-free soft brush or hair dryer to remove it gently.
Stained with grease or ngerprint: Use oil-free cotton cloth or paper soaked with alcohol or detergent to wipe from the lens
center outward. Change the cloth and wipe several times if it is not clean enough.
IP Camera User Manual
Important Safeguards and Warnings
3
Warning
This camera should be installed by qualied personnel only.
All the examination and repair work should be done by qualied personnel.
Any unauthorized changes or modications could void the warranty.
Statement
This guide is for reference only.
Product, manuals and specications may be modied without prior notice. Speco Technologies reserves the right to modify
these without notice and without incurring any obligation.
Speco Technologies is not liable for any loss caused by improper operation.
Note:
Before installation, check the package and make sure that all components are included.
Contact your rep or Speco customer service department immediately if something is broken or missing in the package.
Accessory Name
Amount
Network Camera Unit
1
Junction Box
1
Quick Start Guide
1
Installation Accessories Bag
1
CD
1
IP Camera User Manual
Produktspezifikationen
| Marke: | Speco Technologies |
| Kategorie: | Sicherheitskamera |
| Modell: | Intensifier O6FD4M |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Speco Technologies Intensifier O6FD4M benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Sicherheitskamera Speco Technologies
8 Juni 2025
6 Juni 2025
14 August 2024
26 Mai 2024
26 Mai 2024
22 Mai 2024
21 Mai 2024
19 Mai 2024
16 Mai 2024
Bedienungsanleitung Sicherheitskamera
- Brinno
- Digimerge
- Zebra
- Boss
- Foscam
- Feelworld
- Mobotix
- Grundig
- Sitecom
- AVerMedia
- Sony
- Pyle
- IOIO
- Panasonic
- Exacq
Neueste Bedienungsanleitung für -Kategorien-
15 Juni 2025
15 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025