SSV Works WP-RZO + 2 Bedienungsanleitung

SSV Works Lautsprecher WP-RZO + 2

Lies die bedienungsanleitung für SSV Works WP-RZO + 2 (2 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 47 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 24 Bewertungen. Hast du eine Frage zu SSV Works WP-RZO + 2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
Tools Needed For Installaon
WP-RZO + 2
POLARIS RZR OVERHEAD 2 SPEAKER ADD ON
Drill with Drill bits
Phillips Head Screwdriver
Wire Crimpers / Strippers
Thread locker
1) From the underside of the cage, place the enclosure into the rear cage area.up
2) While holding the enclosure in place, put one of the brackets on top of the enclosure and using the
screws provided. Screw into the threaded insert on the enclosure. Do not over tighten the screws. (it is
recommended to use -Tight or another type of thread locker to prevent the screws from Loc
loosening)
3) Repeat for the second bracket
4) This is an step that can be done if you desire, Using a drill and drill bit, pre drill the holes for the optional
screws to mount the brackets to the cage, Once the holes are pre drilled, screw the provided screws into
the holes you just drilled to secure the enclosure in place.
Figure 4
Figure 1 Figure 2
Figure 3


Produktspezifikationen

Marke: SSV Works
Kategorie: Lautsprecher
Modell: WP-RZO + 2

Brauchst du Hilfe?

Wenn Sie Hilfe mit SSV Works WP-RZO + 2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten