StarTech.com 25SATSAS35HD Bedienungsanleitung

Lies die bedienungsanleitung für StarTech.com 25SATSAS35HD (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 15 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 2 Bewertungen. Hast du eine Frage zu StarTech.com 25SATSAS35HD oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Quick Start Guide

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

JP:取扱説明書 - jp.startech.com

Manual Revision: 10/25/2018

For the most up-to-date information, please visit:

www.startech. com/25SATSAS35HD

Package Contents

• 1 x Hard Drive Adapter Enclosure

• 1 x Set of Mounting Hardware

• 1 x Quick Start Guide

Requirements

Hardware:

Note:The following hardware is not included.

• 2.5” Hard Disk Drive (HDD) or Solid State Drive (SSD).

• 3.5” SATA/SAS host device (e.g. computer, docking system, or

backplane).

Note: When installing a SAS Drive into the Hard Drive Adapter

Enclosure, a SAS host device must also be used.

• Philps Head Screw Driver

• Computer with Available Drive Cage/Bay

• (OPTIONAL):

• SATA/SAS Data Cables

• 15-pin SATA Power Connector

• Motherboard with an Available SATA Data Header

Product Diagram

Actual product may vary from photos.

Front View:

1. Release Switch

2. Enclosure Door

3. Mounting Holes (3 per side)

25SATSAS35HD

2.5” SATA/SAS Drive to 3.5” SATA Hard Drive Adapter Enclosure

Rear View:

1. SATA/SAS Power Port

2. SATA/SAS Data Port

Installation (Tool-less)

Installing a Hard Drive into the Hard Drive Adapter

Enclosure:

Warning: Hard drives require careful handling.

1. On the Hard Drive Adapter Enclosure, slide the Release Switch to

the right.

2. The Enclosure Door will open giving you access to the 2.5” drive

slot.

3. (CAREFULLY) insert a 2.5” HDD or SSD (label side up) into the drive

slot. Make sure that the 2.5” HDD or SSD is properly aligned in the

Hard Drive Adapter Enclosure to ensure connectivity (with SATA/

SAS port).

4. (CAREFULLY) close the Enclosure Door, the 2.5”HDD or SSD will

slide into the Hard Drive Adapter Enclosure and connect to the

drive connector, securing the 2.5” HDD or SSD in place.

Mounting

Screw Mount:

Recommended: Leave space around the Hard Drive Adapter

Enclosure, when installing it into a PC or server chassis to ensure

proper airow and heat dissipation.

1. Insert the Hard Drive Adapter Enclosure into the Drive Cage/Bay

label side up.

2. On the Drive Cage/Bay, align the mounting screw holes (on each

side) with the corresponding Mounting Hole on the Hard Drive

Adapter Enclosure.

3. Insert a screw (included) into each of the Mounting Holes.

4. Tighten the screws, making sure not to over-tighten.

1

2

3

1

2

Produktspezifikationen