StarTech.com ET91000SM402 Bedienungsanleitung

Lies die bedienungsanleitung für StarTech.com ET91000SM402 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 3 Bewertungen. Hast du eine Frage zu StarTech.com ET91000SM402 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Instruction Manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 03/03/2016

For the most up-to-date information, please visit: www.startech.com

Packaging Contents

• 1 x Fiber Media Converter

• 1 x Universal Power Adapter

• 3 x Power Adapter Plug (NA/ UK/ EU)

• 1 x Instruction Manual

System Requirements

• 1000BASE-T compatible Ethernet network equipment

• RJ45 terminated UTP Cat5e or better Ethernet cable

• 1000BASE-LX/SX compatible ber optic network equipment

• LC/SC terminated single mode 9/125 μm ber optic cable

• Available AC electrical outlet

ET1000S40LC2 / ET91000SM402

Gigabit Ethernet to Single Mode LC/SC Fiber Media Converter - 40 KM

Installation

1. Make sure the DIP switches are set appropriately for your

network conguration (see “DIP Switch Settings“ section

for details).

2. Connect the ber optic network cable from a computer/

switch/media converter to the LC connector on the

media converter.

NOTE: When connecting the ber cable, make sure to

connect the Tx (transmit) terminal on one end, with the Rx

(receive) terminal on the other end.

3. Connect a UTP Ethernet cable, from a computer/switch to

the RJ45 jack on the media converter.

4. Connect the power adapter to the media converter.

5. The following example illustrates the connection scheme

when connecting from a 1000BASE-T Ethernet port of a

hub/switch to a 1000BASE-SX/LX port of another hub/

switch, through the ber media converter:

6. The following example illustrates the connection scheme

when connecting from a 1000BASE-T Ethernet port on a

hub/switch to a 1000BASE-T Ethernet Network Interface

Card (NIC) in a computer through the ber media

converter:

Dip Switch

LED Indicators

Card Release

Thumbscrew

RJ45 Ethernet

connector

LC Duplex Fiber

connector

ET1000S40LC2 - Front View

ET91000SM402 - Front View

ET1000S40LC2 / ET91000SM402 - Rear View

DC Power connector

Ground point

(optional)

Dip SwitchLED Indicators

Card Release

Thumbscrew

RJ45 Ethernet connector

SC Duplex Fiber

connector

DIP Switch Settings

Full/ Half:

Ethernet Duplex mode will be congured for Full or Half.

LFP:

Link Fault Pass-through will pass a link failure to the

Ethernet side, if a link failure is encountered on the ber

side and vice versa. Otherwise, the Ethernet side will

continue to show no link failures, even if the ber side has

no link.

(OFF = Not active, On = Active)

Auto/Force:

Auto negotiate duplex mode, or force Full/Half via DIP switches.

Produktspezifikationen