StarTech.com P2AD122-KVM-SWITCH Bedienungsanleitung
StarTech.com
Schalter
P2AD122-KVM-SWITCH
Lies die bedienungsanleitung für StarTech.com P2AD122-KVM-SWITCH (1 Seiten) kostenlos online; sie gehört zur Kategorie Schalter. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 7 Bewertungen. Hast du eine Frage zu StarTech.com P2AD122-KVM-SWITCH oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
Hotkey Command Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Hotkey Command Revision: January 29, 2025
2-Port 4K 60Hz DisplayPort KVM Switch - USB 5Gbps Hub - EDID Emulation
Product IDs
P2AD122-KVM-SWITCH
Product Information
For the latest software, manuals, product information, technical specications, and
declarations of conformance, please visit:
www.StarTech.com/P2AD122-KVM-SWITCH
Hotkey Commands
Hotkey commands are keystroke sequences that initiate computer/device functions.
Hotkey commands can be used to initiate KVM Switch functions. A hotkey command
sequence must be initiated by the HK_LCode, followed by 1-2 additional keystrokes.
Successful hotkey command inputs result in a high-pitched beep. Unsuccessful hotkey
command inputs result in a low-pitched beep.
Notes:
- All keystroke combinations must be entered in rapid succession.
- Press and release the indicated keys, unless otherwise specied.
- Numbers entered during the hotkey sequence cannot be entered using a number pad
HK_LCode
Option 1
• Scr Lck + Scr Lck
Option 2
• Left Ctrl + Left Ctrl
Option 3
• Left Shift (Hold) + Num Lck + Num Lck + Release Left Shift
Hotkey Command Function
HK_LCode 1 ~ 2 + • Select PC 1 ~ PC 2
HK_LCode F1 + • Start Auto Scan
HK_LCode F2 +
• Start Manual Scan -- Manually switch back and forth
between PCs
• Press the or key to select the Up Arrow Down Arrow
next/previous PC
HK_LCode F3 +
• Adjust Scan Rate - KVM Switch generates one to four
beeps that indicate the duration of the scan time:
• One beep = 3 seconds
• Two beeps = 8 seconds
• Three beeps = 15 seconds
• Four beeps = 30 seconds
HK_LCode + F5
• Enable/Disable the binding of PC and Audio Switching.
• Bound by default forcing PC and Audio to switch
together
• Unbound = PC Audio stops following the selected PC
when switching (1 beep)
• Bound = PC Audio matches the selected PC (2 beeps)
HK_LCode + A
• Force Audio to follow selected PC
• If audio was unbound, this command will rebind
audio to switch with the PC ports
HK_LCode + Alt (Hold)
+ Right Ctrl + Release
Alt
• Change leading hotkey to Left Ctrl + Left Ctrl
Right Ctrl + Right Ctrl
HK_LCode + Alt (Hold)
+ Left Ctrl + Release
Alt
• Change leading hotkey to Right Ctrl + Right Ctrl
Left Ctrl + Left Ctrl
Produktspezifikationen
| Marke: | StarTech.com |
| Kategorie: | Schalter |
| Modell: | P2AD122-KVM-SWITCH |
Brauchst du Hilfe?
Wenn Sie Hilfe mit StarTech.com P2AD122-KVM-SWITCH benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schalter StarTech.com
19 September 2025
10 September 2025
10 September 2025
10 September 2025
5 September 2025
19 August 2025
18 August 2025
18 August 2025
18 August 2025
18 August 2025
Bedienungsanleitung Schalter
- Gira
- INOGENI
- Intellinet
- Finder
- Hama
- Matrox
- OSD Audio
- Grässlin
- Kreiling
- Alecto
- Abus
- Hamlet
- Gigahertz Solutions
- Intermatic
- Kraus & Naimer
Neueste Bedienungsanleitung für -Kategorien-
16 Januar 2026
13 Januar 2026
11 Januar 2026
10 Januar 2026
10 Januar 2026
10 Januar 2026
9 Januar 2026
5 Januar 2026
2 Januar 2026
28 Dezember 2025