StarTech.com SM22BU31C3R Bedienungsanleitung

StarTech.com Externe Festplatte SM22BU31C3R

Lies die bedienungsanleitung für StarTech.com SM22BU31C3R (2 Seiten) kostenlos online; sie gehört zur Kategorie Externe Festplatte. Dieses Handbuch wurde von 18 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 9.5 Bewertungen. Hast du eine Frage zu StarTech.com SM22BU31C3R oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/2

Quick-start guide

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 01/13/2017

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/SM22BU31C3R.

Package contents

• 1 x M.2 SATA enclosure

• 1 x USB-A to Micro-B cable

• 1 x USB-C to Micro-B cable

• 2 x housing assembly screws

• 2 x sets of M.2 mounting hardware

• 1 x screwdriver

• 1 x quick-start guide

Requirements

• One or two M.2 SATA drives

• Phillips screwdriver (not provided)

• 5 mm nut driver or a set of small pliers

This dual-slot enclosure is OS independent and doesn’t require any

additional drivers or software.

To obtain the maximum USB throughput, you must use a system

with a USB 3.1 Gen 2 (10Gbps) port.

Requirements are subject to change. For the latest requirements,

please visit www.StarTech.com/SM22BU31C3R.

SM22BU31C3R

Dual-Slot M.2 NGFF SATA Enclosure - USB 3.1 (10Gbps) - RAID

*actual product may vary from photos

Product diagram

Drive length adjustment holes

RAID set button

Install an M.2 SATA drive

Warning! Drives should be handled carefully, especially when

they’re transported. If you’re not careful with your drives, you may

lose data as a result. Always handle storage devices with caution.

Make sure that you’re properly grounded by wearing an anti-static

strap when you install any computer component. If an anti-static

strap isn’t available, touch a large grounded metal surface for several

seconds to discharge any built-up static electricity.

Note: The screwdriver provided with the enclosure is meant to be

used with the M.2 mounting hardware and is too small to be used

with the housing assembly screws.

1. If the cover plate is installed, use a Phillips screwdriver (not

provided) to remove the housing assembly screws located on

either side of the on the enclosure.USB 3.1 Micro-B port

Note: The enclosure ships unassembled, so you don’t need to

remove the cover plate the rst time that you install a drive.

2. Depending on the length of your drive, you might need to move

the preinstalled mounting screw and stando. Place your drive

next to the drive tray and note the drive length adjustment hole

that matches the length of your drive. If the mounting screw

and stando are already installed in the correct position, use

the provided screwdriver to remove the mounting screw and

proceed to step 5.

3. On the reverse side of the drive tray, use a small set of pliers to

remove the nut holding the mounting screw and stando in

place.

4. Place the nut and stando that you removed in the previous step

in the that matches the length of drive length adjustment hole

your drive and tighten them.

5. Gently slide the connector on your M.2 SATA drive into the

corresponding M.2 SATA connectors on the enclosure. The

connector on your M.2 SATA drive is keyed so that it only ts one

way.

Housing assembly screw

LED indicators

USB 3.1 Micro-B port

Drive length adjustment holes

M.2 mounting

hardware

RAID mode

DIP switches

M.2 SATA

connector

M.2 SATA

connector

M.2 mounting

hardware

Housing assembly screw

Produktspezifikationen

Marke:	StarTech.com
Kategorie:	Externe Festplatte
Modell:	SM22BU31C3R
USB Anschluss:	Ja
Breite:	80 mm
Tiefe:	100 mm
Gewicht:	96 g
Mitgelieferte Kabel:	USB
Produkttyp:	SSD-Gehäuse
Produktfarbe:	Schwarz
Höhe:	15 mm
Energiequelle:	USB
Material:	Aluminium
Betriebstemperatur:	0 - 60 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 90 %
Verpackungsbreite:	131 mm
Verpackungstiefe:	165 mm
Verpackungshöhe:	32 mm
Paketgewicht:	195 g
Zertifizierung:	CE, FCC
Warentarifnummer (HS):	84733080
Betriebsanleitung:	Ja
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-20 - 70 °C
USB-Stecker:	Micro-USB B
Anzahl der USB-Anschlüsse:	1
USB-Version:	3.2 Gen 2 (3.1 Gen 2)
Mittlere Betriebsdauer zwischen Ausfällen (MTBF):	35000 h
Anzahl der unterstützten Speicherlaufwerke:	2
RAID Level:	0, 1,BIG, JBOD
Unterstützte Speicherlaufwerk-Schnittstellen:	M.2, Serial ATA, Serial ATA II, Serial ATA III
Nachhaltigkeitszertifikate:	RoHS
Anzahl Lüfter:	0 Lüfter
Datenübertragungsrate:	10 Gbit/s
Integriertes USB-Kabel:	Nein
Schrauben enthalten:	Ja
Größe des Speicherlaufwerks:	M.2 "
Chipsatz:	ASMedia - ASM1352R
Max. Speicherkapazität:	2 TB
Unterstützte Speicherlaufwerkslängen:	80 mm
USB-Anschluss Geschlecht:	Weiblich
UASP-Unterstützung:	Ja
Schraubendreher enthalten:	Ja
Port-Multiplier:	Ja