StarTech.com ST1000PEXPSE Bedienungsanleitung

Lies die bedienungsanleitung für StarTech.com ST1000PEXPSE (32 Seiten) kostenlos online; sie gehört zur Kategorie Netzwerkkarte/Adapter. Dieses Handbuch wurde von 45 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 6 Bewertungen. Hast du eine Frage zu StarTech.com ST1000PEXPSE oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: February 10, 2022

Product Diagram (ST1000PEXPSE)

Port/LED/

Connector

Function

1Bracket• Low-Prole and Full-Height Brackets are included

2

Link/POE LED

Indicators

• Indicates PoE and Link Speeds

• Left LED Indicator is Solid Green = PoE Power is

Enabled

• Left LED Indicator is O = No PoE Power

• Right LED Indicator is Solid Amber = 2.5Gbps Link

• Right LED Indicator is Solid Green

=1Gbps/100Mbps/10Mbps Link

3Ethernet Port

• Connect a Network Cable to the Network Card

• Supports IEEE 802.3at and IEEE 802.3af

4

PCIe p1-x1

Connector

• Insert into a PCI Express Slot

5

J5 Power

Connector

• Optional: connect the Host Computer Power

Supply (4 PIN SP4/Floppy power connector) for PoE

Functionality

6

SATA Power

Connector

• Optional: connect the Host Computer Power Supply

(15 PIN SATA power connector) for PoE Functionality

1-Port PCI Express 2.5Gbps Ethernet PoE Network Adapter Card

Requirements

For the latest requirements, please visit www.startech.com/ST1000PEXPSE

• Computer with an available PCI Express Slot (x1, x4, x8, or x16)

Installation

Install the PCI Express Card

WARNING!

PCI Express Cards can be severely damaged by static electricity. Make sure that

you are properly grounded before you open your Computer Case or touch the PCI

Express Card. You should wear an Anti-Static Strap when you install any computer

component. If an Anti-Static Strap isn’t available, discharge any built-up static

electricity by touching a large Grounded Metal Surface for several seconds. Only

handle the PCI Express Card by its edges and don’t touch the gold connectors.

1. Turn o your Computer and any Peripheral Devices that are connected to it (for

example, Printers, External Hard Drives, etc.).

2. Unplug the Power Cable from the back of your Computer.

3. Disconnect any Peripheral Devices that are connected to your Computer.

4. Remove the Cover from your Computer Case. Consult the documentation that

came with your Computer for details about how to do this safely.

5. Locate an open PCI Express Slot and remove the corresponding Slot Cover Plate

from the back of your Computer Case. Consult the documentation that came with

your Computer for details about how to do this safely. This card works in PCI Express

x1, x4, x8, or p1-x16 slots.

6. Gently insert the PCI Express Card into the open PCI Express Slot and fasten the

Bracket to the back of the Computer Case.

Note: If you install the PCI Express Card into a Small Form Factor or a Low-Prole

Desktop System, it may be necessary to replace the pre-installed standard Full-

Height Bracket with the included Low-Prole Bracket.

7. For PoE functionality use just one of the following

a. Connect a 4 PIN SP4 Floppy power connector from the Host Computer Power

Supply to the J5 Power Connector on the card.

b. Connect a 15 PIN SATA connector from the Host Computer Power Supply to

the SATA power connector on the card.

5

3

1

2

6

4

Produktspezifikationen