StarTech.com ST10GSPEXNDP Bedienungsanleitung

Lies die bedienungsanleitung für StarTech.com ST10GSPEXNDP (2 Seiten) kostenlos online; sie gehört zur Kategorie Netzwerkkarte/Adapter. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2 Bewertungen. Hast du eine Frage zu StarTech.com ST10GSPEXNDP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: December 10, 2018 1:22 PM

Product Diagram (ST10GSPEXNDP)

Port/LEDFunction

1Link Speed LED

• Solid Amber: Link speed is 10G.

• Solid Green: Link speed is 1G.

• O: Link speed is 100G.

2Ethernet Port• Used to connect a Network Device.

3

Link State LED/

Activity LED

• Solid Green: The Network Card is connected

to a network.

• Flashing: Indicates activity.

4PCIe p1-x8 Connector

• Used to connect the Network Card to a

Computer.

Requirements

For the latest requirements and full manual, please visit www.startech.com/

ST10GSPEXNDP.

• PCI Express enabled computer with an available PCI Express slot (x8 or x16)

• Operating systems:

• Microsoft® Hyper-V®

• Windows® 7, 8, 8.1, 10

• Windows Server® 2003, 2008 R2, 2012

• Linux® kernel 2.6.x and 3.x

Dual-Port 10GBase-T / NBase-T Ethernet Network Card | PCI Express

1

Installation

Installing the Network Card

Note: Network cards can be severely damaged by static electricity. Make sure that

you’re properly grounded before you open your computer case or touch the PCIe card.

1. Turn o the Computer and any connected Devices (e.g. printers, etc.).

2. Disconnect any connected Devices and unplug the power cable from the

Computer.

3. Open the Computer Case. For more information, consult the user manual that came

with the Computer.

4. Locate a PCI Express Slot (x8 or x16) and remove the corresponding metal cover

plate from the back of the Computer Case.

5. Gently insert the PCIe p1-x8 Connector on the Network Card into the PCI Express

Slot (x8 or x16) on the Computer.

6. Use a Computer Case Screw to fasten the Bracket on the Network Card to the

back of the Computer Case.

7. Place the cover back onto your Computer Case.

8. Reconnect all Cables and Devices and turn the Computer back on.

Installing the Driver

1. On the Found New Hardware pop-up, click the Cancel button.

2. Using a web browser, navigate to www.startech.com/ST10GSPEXNDP.

3. On the Product page, click the Support tab located in the middle of the screen.

4. In the Drivers and Downloads section, click on the driver link that corresponds with

the operating system running on the Host Computer.

5. Once the download is complete, extract the contents of the .ZIP le.

6. Click the appropriate driver for the version of operating system that you are running

and follow the on-screen prompts to complete the installation.

2

3

4

Produktspezifikationen