SureFire XR1-A Bedienungsanleitung
SureFire
Nicht kategorisiert
XR1-A
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr SureFire XR1-A (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.3 Sternen bewertet
Seite 1/2
COMPACT RECHARGEABLE HANDGUN LIGHT
USER MANUAL
Revision B 12-2023
71-01-1110
XR1-A
18300 MT. BALDY CIRCLE
FOUNTAIN VALLEY, CA 92708-6122
WWW.SUREFIRE.COM
Patent: 9,551,550
THE SUREFIRE NO-HASSLE GUARANTEE
We’ll do what it takes to keep your SureFire gear running smoothly.
SureFire warrants that if you — our customer — purchase one
of our products, and we determine that it is defective in material
and/or workmanship during your lifetime, we will repair or
replace it — no hassle!
Our warranty does not cover consumables or normal wear-and-
tear — things like batteries draining, headbands and headpads
wearing out, ink cartridges running out, and switches wearing
out — or damage resulting from abuse, alterations, unauthorized
repairs, or use contrary to SureFire’s user manuals.
Should you need a replacement product, SureFire reserves the
right to replace an obsolete product with a current production,
like model. In the event that any issue with a SureFire product is
not covered under this warranty SureFire can arrange to have the
product repaired for a reasonable fee.
WARRANTY CLAIMS
For claims, contact Customer Service at 714-545-9444 to
obtain a Return Merchandise Authorization number (RMA#).
Then package the unit carefully and send to (no CODs):
SureFire, LLC.
Repairs Department, RMA#____
17680 Newhope Street, Suite B
Fountain Valley, CA 92708
SureFire will pay any reasonable shipping costs to return the unit to you.
XR1-A
OUTPUT
800 lumens
RUNTIME
40 minutes
PEAK BEAM INTENSITY
16,000 candela
DISTANCE
250 meters
CONSTRUCTION
Aluminum
FINISH
Hard Anodized (MIL-A-8625 Type III, Class 2)
WEIGHT (w/batteries)
2.2 oz (62 g)
LENGTH
2.46 in (6.25 cm)
BEZEL DIAMETERS
0.58 in (1.47 cm)
BATTERIES
Integrated rechargeable Lithium Polymer
SWITCHING
Ambidextrous momentary / Ambidextrous toggle tap
All performance claims tested to ANSI/PLATO FL1-2019 Standard.
SPECIFICATIONS
MAINTENANCE
Use a clean, dry cloth to wipe off body and window. Periodically
clean and lubricate threads. For additional tips on maintaining
your SureFire illumination tool, visit www.surefire.com/faqs-
maintenance.
ACCESSORIES
SureFire makes a full line of accessories for most of its
illumination tools. For a complete listing,
visit www.surefire.com/partsaccessories.
STANDARD DISCLAIMER
Except as specified above or prohibited by applicable law: all
express or implied conditions and warranties, including, without
limitation, any implied warranty or condition of merchantability
or fitness for a particular purpose, or accuracy of any
informational content, are hereby excluded and disclaimed by
SureFire; and in no event will SureFire be liable for any special,
direct, indirect, consequential, incidental or punitive damages
howsoever arising and regardless of the theory of liability, even
if advised of the possibility of such damages. Products, prices,
availability, specifications, and offers are subject to change or
cancellation at any time without notice.
B13 (XR BATTERY) RATING/PERFORMANCE
TYPE
Lithium Polymer
VOLTAGE
3.7V
CERTIFICATION
UN38.3 & UL1642
CHARGE END VOLTAGE
4.2V
DISCHARGE END VOLTAGE
2.7V
ENERGY
1.49 Wh
LITHIUM CONTENT
0.162 g
OPERATING TEMP RANGE
(Charging)
0-45C
OPERATING TEMP RANGE
(Discharging)
-10-60C
RATED CAPACITY
540mAh
STANDARD CHARGE RATE
0.5C
STORAGE TEMP RANGE
-10-45C
USB CHARGE CURRENT
500mA
USB CHARGE VOLTAGE
5V
WEIGHT
20.5 g
BATTERY PACK SPEC TABLE:
KIT CONTENTS:
• XR1-A WeaponLight
• B13 Lithium Polymer Battery
• CH22 Cradle Charger
• MICRO-USB to USB Type A Cable
• Picatinny Crossmember
• SIG SAUER P320 Crossmember
*Prior to first use, remove battery contact insulator
INSTALLING CROSSMEMBER
To attach the XR1 to a Picatinny rail, the Universal crossmember
must first be removed and the included Picatinny crossmember
(marked “P”) must be correctly installed as follows.
1. To remove the crossmember, insert a small flat-head
screwdriver or the rim of a fired brass casing into opening
on the back side of the crossmember and lift it out
(Figure 1). Store for future use.
2. Insert crossmember into the vacated crossmember slot.
NOTE: If installing onto a SIG SAUER P320 series pistol,
insert the “S” crossmember.
MOUNTING XR1 TO HOST FIREARM
NOTE: The appropriate crossmember MUST be installed (“U”
for Universal rails; “P” for Picatinny rails) to attach XR1 to a
weapon’s accessory rail. Some pistols with a MIL-STD-1913
rail may require the Universal crossmember to properly
interface with the location of the front trigger guard surface.
1. Adjust gap between stationary and movable Rail Guides by
turning rail-adjustment bolt clockwise or counterclockwise
until gap is sufficiently wide to fit over weapon accessory rail.
2. Align fixed rail with weapon’s accessory rail and hinge XR1
over the cross slot of host weapon.
3. Mate crossmember with corresponding slot in weapon’s
accessory rail.
4. Secure by turning Rail Adjustment bolt clockwise.
Using a torque wrench, tighten to 6in-lb when mounting to
a polymer rail, and 8-9in-lb when mounting to a metal rail.
If a torque wrench is not available, tighten until snug and
then apply an additional 1/4 turn. Do NOT overtighten!
The bolt will break if excessive force is applied with a tool.
BATTERY INSTALLATION & REMOVAL
Position battery below XR1 and insert until it clicks into place
(Figure 2). Press battery latch lock forward towards the direction
of the beam and pull the battery down out of the XR1 (Figure 2).
BODY FUEL GAUGE
The Fuel Gauge LED on the back of the XR1 body illuminates when the
light, laser, and light+laser modes are activated (Figure 3). The state
of charge is indicated below:
Blinking RED: 0-20%
Solid RED: 21-50%
Solid YELLOW: 51-80%
Solid GREEN: 81-100%
LIGHT OPERATION
ACTIVATING THE XR1
The XR1 was designed to allow support-hand activation in both
momentary-on and constant-on modes when firing right- or
left-handed (Figure 2).
TOGGLE SWITCHING
Momentary-on activation Press and hold either toggle switch
for more than a tenth of a second or as long as needed to
momentarily activate the XR1. Release to turn off (Figure 3).
Constant-on activation with toggle switches: The XR1 is pro-
grammed for constant-on activation by a quick tap and release
action via either toggle switches (Figure 3).
NOTE: The light will not activate when these rear switches are
pushed upward or side-to-side. This intentional design-feature
minimizes unintended activation when drawing or holstering.
FIGURE 1
Rail-Adjustment
Bolt
Moveable Rail
Stationary
Rail
Charge Status LED
Charge Status LED
Power Supply LED
FIGURE 2
Battery Latch
Lock
FIGURE 3
FIGURE 4
Press Down to Activate
Momentary-On
Quickly Tap and Release to Activate
Constant-On
Fuel
Gauge
Crossmember
BATTERY CHARGING
The B13 battery needs to be removed from the XR1 and placed
into the CH22 battery charger to charge.
HOW TO CHARGE THE BATTERY
1. Insert the MICRO-USB cable plug into the CH22 battery
charger.
2. Insert the USB cable plug into a power source.
3. Insert the B13 battery into the CH22 charger (Figure 4).
CH22 CHARGER FUEL GAUGE LEDS
The B13 battery pack has LEDs on the top of the pack which are not
visible when the pack is inserted into the charger. There are 3 LEDs
on the face of the charger (Figure 4):
• Center LED illuminates solid RED which indicates power is active.
• The right and left LEDs beneath each cradle position indicate its
state of charge WHILE CHARGING.
• Once the power is present, the state of charge is indicated below:
Solid RED: 0-25%
Solid YELLOW: 26-75%
Solid GREEN: 76-95%
Blinking GREEN: 96-100%
NOTE: The three fuel gauge LEDs on the top of the battery
will illuminate according to the chart above while charging
or when the battery status button is pressed.
The battery pack can remain in the charger indefinitely.
Once the battery capacity drops 2%, the charger will begin
charging to full capacity.
FUEL GAUGE LED INDICATOR
LEDS BATTERY CAPACITY
0-15%
16-50%
51-80%
81-100%
= blinking = off = on
Produktspezifikationen
| Marke: | SureFire |
| Kategorie: | Nicht kategorisiert |
| Modell: | XR1-A |
Brauchst du Hilfe?
Wenn Sie Hilfe mit SureFire XR1-A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert SureFire
7 Juni 2025
7 Juni 2025
6 Juni 2025
16 August 2024
7 August 2024
7 August 2024
Bedienungsanleitung Nicht kategorisiert
- Nicht kategorisiert Blukac
- Nicht kategorisiert Avocor
- Nicht kategorisiert Hagor
- Nicht kategorisiert Efbe-Schott
- Nicht kategorisiert DiGiGrid
- Nicht kategorisiert Lifenaxx
- Nicht kategorisiert Wagner SprayTech
- Nicht kategorisiert Profoto
- Nicht kategorisiert United Office
- Nicht kategorisiert Russell Hobbs
- Nicht kategorisiert Fulltone
- Nicht kategorisiert Hoymiles
- Nicht kategorisiert Fortinet
- Nicht kategorisiert Edesa
- Nicht kategorisiert Nautilus
Neueste Bedienungsanleitung fĂĽr -Kategorien-
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025