SureFire XR2-A-RD Bedienungsanleitung
SureFire
Nicht kategorisiert
XR2-A-RD
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr SureFire XR2-A-RD (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 5.0 Sternen bewertet
Seite 1/2
COMPACT RECHARGEABLE HANDGUN LIGHT + LASER SIGHT
XR2-A-GN
XR2-A-RD
USER MANUAL
Revision B 12-2023
71-01-1109
XR2-A-GN, XR2-A-RD
18300 MT. BALDY CIRCLE
FOUNTAIN VALLEY, CA 92708-6122
WWW.SUREFIRE.COM
Patent: 9,551,550
THE SUREFIRE NO-HASSLE GUARANTEE
We’ll do what it takes to keep your SureFire gear running smoothly.
SureFire warrants that if you — our customer — purchase one
of our products, and we determine that it is defective in material
and/or workmanship during your lifetime, we will repair or
replace it — no hassle!
Our warranty does not cover consumables or normal wear-and-
tear — things like batteries draining, headbands and headpads
wearing out, ink cartridges running out, and switches wearing
out — or damage resulting from abuse, alterations, unauthorized
repairs, or use contrary to SureFire’s user manuals.
Should you need a replacement product, SureFire reserves the
right to replace an obsolete product with a current production,
like model. In the event that any issue with a SureFire product is
not covered under this warranty SureFire can arrange to have the
product repaired for a reasonable fee.
STANDARD DISCLAIMER
Except as specified above or prohibited by applicable law: all
express or implied conditions and warranties, including, without
limitation, any implied warranty or condition of merchantability or
fitness for a particular purpose, or accuracy of any informational
content, are hereby excluded and disclaimed by SureFire; and in
no event will SureFire be liable for any special, direct, indirect,
consequential, incidental or punitive damages howsoever
arising and regardless of the theory of liability, even if advised
of the possibility of such damages. Products, prices, availability,
specifications, and offers are subject to change or cancellation at
any time without notice.
WARRANTY CLAIMS
For claims, contact Customer Service at 714-545-9444 to
obtain a Return Merchandise Authorization number (RMA#).
Then package the unit carefully and send to (no CODs):
SureFire, LLC.
Repairs Department, RMA#____
17680 Newhope Street, Suite B
Fountain Valley, CA 92708
SureFire will pay any reasonable shipping costs to return the unit to you.
MAINTENANCE
Use a clean, dry cloth to wipe off body and window. Periodi-
cally clean and lubricate threads. For additional tips on
maintaining your SureFire illumination tool, visit
www.surefire.com/faqs-maintenance.
ACCESSORIES
SureFire makes a full line of accessories for most of its
illumination tools. For a complete listing,
visit www.surefire.com/partsaccessories.
XR2
OUTPUT
800 lumens
Green laser: < 5 mW; 515 nm; Class IIIa
Red laser: < 5 mW; 635 nm; Class IIIa
RUNTIME
35 minutes
PEAK BEAM INTENSITY
16,000 candela
DISTANCE
250 meters
CONSTRUCTION
Aluminum
FINISH
Hard Anodized (MIL-A-8625 Type III, Class 2)
WEIGHT (w/batteries)
2.3 oz (65 g)
LENGTH
2.46 in (6.25 cm)
BEZEL DIAMETERS
0.58 in (1.47 cm)
BATTERIES
Integrated rechargeable Lithium Polymer
SWITCHING
Ambidextrous momentary / Ambidextrous toggle tap
All performance claims tested to ANSI/PLATO FL1-2019 Standard.
SPECIFICATIONS
515nm at <5mW
B13 (XR BATTERY) RATING/PERFORMANCE
TYPE
Lithium Polymer
VOLTAGE
3.7V
CERTIFICATION
UN38.3 & UL1642
CHARGE END VOLTAGE
4.2V
DISCHARGE END VOLTAGE
2.7V
ENERGY
1.49 Wh
LITHIUM CONTENT
0.162 g
OPERATING TEMP RANGE
(Charging)
0-45C
OPERATING TEMP RANGE
(Discharging)
-10-60C
RATED CAPACITY
540mAh
STANDARD CHARGE RATE
0.5C
STORAGE TEMP RANGE
-10-45C
USB CHARGE CURRENT
500mA
USB CHARGE VOLTAGE
5V
WEIGHT
20.5 g
BATTERY PACK SPEC TABLE:
KIT CONTENTS:
• XR2 WeaponLight
• B13 Lithium Polymer Battery
• CH22 Cradle Charger
• MICRO-USB to USB Type A Cable
• 0.050-inch Hex Wrench for elevation and windage screws
• Picatinny Crossmember
• SIG SAUER P320 Crossmember
*Prior to first use, remove battery contact insulator
INSTALLING CROSSMEMBER
To attach XR2 to a Picatinny rail, the Universal crossmember must
first be removed and the included Picatinny crossmember (marked
“P”) must be correctly installed as follows.
1. To remove the crossmember, insert a small flat-head
screwdriver or the rim of a fired brass casing into opening
on the back side of the crossmember and lift it out
(Figure 1). Store for future use.
2. Insert crossmember into the vacated crossmember slot.
NOTE: If installing onto a SIG SAUER P320 series pistol,
insert the “S” crossmember.
MOUNTING XR2 TO HOST FIREARM
Note: The appropriate crossmember MUST be installed (“U”
for Universal rails; “P” for Picatinny rails) to attach XR2 to a
weapon’s accessory rail. Some pistols with a MIL-STD-1913 rail
may require the Universal crossmember to properly interface with
the location of the front trigger guard surface.
1. Loosen the rail adjustment bolt, press the head of the bolt into
the XR2 body, which will create a wide enough gap between
the rail guides to fit over the weapon accessory rail.
2. Align fixed rail with weapon’s accessory rail and hinge XR2
over the cross slot of host weapon.
3. Mate crossmember with corresponding slot in weapon’s
accessory rail.
4. Secure by turning Rail Adjustment bolt clockwise.
Using a torque wrench, tighten to 6 in-lb when mounting to a
polymer rail, and 8-9 in-lb when mounting to a metal rail. If a
torque wrench is not available, tighten until snug and then
apply an additional 1/4 turn. Do NOT overtighten! The bolt
will break if excessive force is applied with a tool.
BATTERY INSTALLATION & REMOVAL
Position battery below XR2 and insert until it clicks into place
(Figure 2). Press battery latch lock forward towards the direction of
the beam and pull the battery down out of the XR2 (Figure 2).
BODY FUEL GAUGE
The Fuel Gauge LED on the back of the XR2 body illuminates when the
light, laser, and light+laser modes are activated (Figure 3). The state
of charge is indicated below:
Blinking RED: 0-20%
Solid RED: 21-50%
Solid YELLOW: 51-80%
Solid GREEN: 81-100%
LIGHT & LASER OPERATION
MODE SELECTION
On the shooters left-hand side of the XR2, there is a three posi-
tion mode selector switch, which allows for laser only, white light
only, and laser and light activation. Rotate the mode selector for
desired output settings (Figure 4).
ACTIVATING THE XR2
Momentary-on activation Press and hold either toggle switch
more than 0.5 second or as long as needed to momentarily
activate the XR2. Release to turn off (Figure 3).
Constant-on activation with toggle switches: The XR2 is pro-
grammed for constant-on activation by a quick tap and release
action via either toggle switches (Figure 3).
NOTE: The light will not activate when these rear switches are
pushed upward or side-to-side. This intentional design-feature
minimizes unintended activation when drawing or holstering.
ZEROING/ADJUSTING THE XR2 LASER
SureFire recommends zeroing the laser sight at a distance of 25
yards, against a target, to coincide with point-of-aim of the host
weapon’s factory sights. Any discrepancy in point-of-aim (POA)
versus point-of-impact (POI) at target distances between 10 and 25
yards is negligible. Laser sight may require re-zeroing after the first
10-50 rounds, as the adjustment apparatus may settle into position.
1. While acquiring target with host weapon sights at the desired
range,
determine which direction(s) laser needs to be adjusted for
laser dot position to match weapon sight’s point of aim.
2. Make the necessary adjustments, using the included 0.050-
inch Hex Wrench to tighten or loosen Windage and/or Elevation
adjustment screws (Figure 4) per instructions below, based on
XR2’s mounting position (from shooter’s perspective) and laser
dot’s relation to weapon’s point of aim.
If the laser dot is…
a. …left of POA, tighten Windage screw by turning counterclockwise.
b. …right of POA, loosen Windage screw by turning clockwise.
c. …above POA, loosen Elevation screw by turning clockwise.
d. …below POA, tighten Elevation screw by turning counterclockwise.
3. Once adjustments have been made, use laser to sight target from
the designated range and fire several rounds, taking care to steady
your aim to minimize any shooter error. Note XR2 point-of-aim
in relation to weapon’s point-of-impact and make any necessary
adjustments. Retest and continue to make any adjustments until
laser’s point-of-aim and weapon’s point-of impact match.
NOTE: Laser calibration should be verified every time XR2 is
removed from host weapon.
FIGURE 1
Rail Adjustment Bolt
Moveable Rail
Stationary Rail
Crossmember
B13 BATTERY
FIGURE 2
Battery Latch Lock
FIGURE 3
Press Down to Activate
Momentary-On
Quickly Tap and Release
to Activate Constant-On
Windage Adjustment Screw
Elevation Adjustment Screw
Laser
White Light
White Light + Laser
FIGURE 4
BATTERY CHARGING
The B13 battery needs to be removed from the XR2 and placed
into the CH22 battery charger to charge.
HOW TO CHARGE THE BATTERY
1. Insert the MICRO-USB cable plug into the CH22 battery
charger.
2. Insert the USB cable plug into a power source.
3. Insert the B13 battery into the CH22 charger (Figure 5).
NOTE: The three fuel gauge LEDs on the top of the battery
will illuminate according to the chart above while charging
or when the battery status button is pressed.
The battery pack can remain in the charger indefinitely. Once
the battery capacity drops 2%, the charger will begin charging
to full capacity.
FUEL GAUGE LED INDICATOR
LEDS BATTERY CAPACITY
0-15%
16-50%
51-80%
81-95%
= blinking = off = on
FIGURE 5
Fuel Gauge
CH22 CHARGER FUEL GAUGE LEDS
The B13 battery pack has LEDs on the top of the pack which are not
visible when the pack is inserted into the charger. There are 3 LEDs on
the face of the charger (Figure 4):
• Center LED illuminates solid RED which indicates power is active.
• The right and left LEDs beneath each cradle position indicate its
state of charge WHILE CHARGING.
• Once the power is present, the state of charge is indicated below:
Solid RED: 0-25%
Solid YELLOW: 26-75%
Solid GREEN: 76-95%
Blinking GREEN: 96-100%
Charge Status LED
Charge Status LED
Power Supply LED
Produktspezifikationen
| Marke: | SureFire |
| Kategorie: | Nicht kategorisiert |
| Modell: | XR2-A-RD |
Brauchst du Hilfe?
Wenn Sie Hilfe mit SureFire XR2-A-RD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert SureFire
7 Juni 2025
7 Juni 2025
6 Juni 2025
16 August 2024
7 August 2024
7 August 2024
Bedienungsanleitung Nicht kategorisiert
- Nicht kategorisiert Endorphin.es
- Nicht kategorisiert Niceboy
- Nicht kategorisiert MarQuant
- Nicht kategorisiert Playtive
- Nicht kategorisiert VCM
- Nicht kategorisiert British Telecom
- Nicht kategorisiert Grimm Audio
- Nicht kategorisiert Pyle
- Nicht kategorisiert City Theatrical
- Nicht kategorisiert Kernau
- Nicht kategorisiert Yuer
- Nicht kategorisiert EtiamPro
- Nicht kategorisiert Eminent
- Nicht kategorisiert Ziggo
- Nicht kategorisiert Texsport
Neueste Bedienungsanleitung fĂĽr -Kategorien-
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025
7 Juni 2025