Techly IC-HEAT001 Bedienungsanleitung
Lies die bedienungsanleitung für Techly IC-HEAT001 (12 Seiten) kostenlos online; sie gehört zur Kategorie Heizung. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2 Bewertungen. Hast du eine Frage zu Techly IC-HEAT001 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/12
P/N: IC-HEAT001
8059018369946
SCAN
for MORE
PRODUCT INFO
2000W FAN HEATER
Technical features
2000
WATT
ADJUSTABLE
PRACTICAL
HANDLE
EN
This product is only suitable for well insulated
spaces or occasional use.
IT
Questo prodotto è adatto solo per spazi
ben isolati o per un uso occasionale.
WWW.TECHLY.COM
EN
User's Manual
IT
Manuale d’istruzione
GENERAL SAFETY INSTRUCTIONS
1. Before using the machine, carefully read this entire instruction manual.
2. Do not use this fan heater in the immediate surroundings of a bath, a shower or a swimming pool.
3. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualied person
in order to avoid a hazard.
4. Warning: In order to avoid overheating, do not cover the heater.
5. The heater must not be located immediately below a socket-outlet.
6. The meaning of gure
in marking is “WARNING: DO NOT COVER”.
7. WARNING: This heater is not equipped with a device to control the room temperature. Do not use this heater in small
rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is
provided.
8. Before using your new heater, check it, including cord and plug, for any visible damage. Do not use a damaged heater,
but send it back to your dealer for replacement.
9. This heater is strictly intended for normal domestic use. Only use it as an additional heater in your home.
10. This heater in not suitable for use in wet or damp spaces such as bathrooms and laundry rooms. Do not place the heater
nearby of taps, bathtub, shower, pool, fountains or other sources of moisture. Make sure it cannot fall into water and
prevent water from getting into the heater itself. If, at any time, the heater does fall into water, unplug it immediately! Do
not use a heater that has a damp interior but have it repaired. Never immerse the heater, cord or plug in water and never
touch it with wet hands.
11. The supply voltage and utility frequency, specied on the machine, need to match those of the socket that is used. The
electrical installation needs to be protected by a residual current device (max. 30 mAmp).
12. Fully extend the cord before plugging in the heater. Make sure it does not come into contact with any part of the heater
and prevent it from heating up any other way. Do not run the cord underneath carpeting; do not cover it with mats, carpet
strips, or similar and make sure it is not placed in any passageways. Make sure the cord cannot be stepped on and that
no furniture is placed on top of it. Do not lead the cord around sharp corners and do not roll it up too tightly after use!
13. If possible, do not use an extension cord, as this poses the risk of overheating and re. If the use of an extension cord is
unavoidable, then make sure it is an undamaged, approved extension cord with a minimum diameter of 2 x 2.5 mm² and
a minimum permissible power of 2000 Watt/10Amp. To prevent overheating, always fully extend the cord!
14. To prevent the circuit being overloaded and fuses being blown, make sure no other appliances are connected to the same
socket or wired to the same electrical circuit as the heater.
15. Do not use the heater outdoors and do not use it in spaces smaller than 6 m².
16. A heater contains hot and/or glowing and sparking components. Do not, therefore, use it in areas where fuels, paint,
ammable liquids and/or gasses etc. are stored.
17. Do not place the heater near, under, or directly opposite a socket and do not place near an open re or other heat source.
18. Do not use the heater near or directly opposite furniture, animals, curtains, paper, clothes, bedding or other inammable
objects. Keep them at least 1 meter away from the heater!
19. Never cover a heater! The heater’s air inlets and outlets should never be obstructed in any way, so as to prevent the
possibility of re. Never use the heater to dry clothes and do not place anything on top of the heater. Do not place it on
soft surfaces such as beds or deep-pile carpets, as they can block openings.
20. Make sure that the air around the heater can circulate freely. Do not place the heater too close to walls or large objects
and do not place it under shelves, cupboards, and similar.
21. Prevent foreign objects from entering the heater via the venting or exhaust openings as this may lead to electric shock,
re or damage.
22. Never leave the heater unattended when switched on. Always switch if off before removing the plug from the socket.
Always unplug the heater when not in use! Pull on the plug to remove from the socket, never pull on the cord!
23 Always switch the heater off, unplug it and leave to cool down before:
a) cleaning the heater
b) carrying out maintenance on the heater
c) touching or moving the heater. Use the handle for this!
24. This machine gets hot when it is in use. To prevent burns, do not let bare skin come into contact with hot surfaces.
25. Do not use a timer or a similar product to automatically switch on the heater. Always perform safety checks before using
the heater!
26. Close supervision is necessary when the product is used near children or incapacitated persons. Do not let children use
the appliance as a toy. This appliance is not suitable to be operated by children or persons who have physical, sensory
and/or mental limitations, or by persons who have no knowledge of, or experience with, this appliance.
27. Keep the heater clean. Dust, dirt and/or a build up of deposits in the heater are a common cause of overheating. Make
sure these deposits are removed regularly.
28. Do not turn on the appliance if you have discovered damage to the appliance, cord or plug, if the appliance is
malfunctioning, if it has been dropped or if there are signs of any other defect. Return the complete product to the vendor
or to a certied electrician for inspection and/or repair. Always ask for original parts.
2000W FAN HEATER
EN - 2
WWW.TECHLY.COM
29. Do not use attachments and/or accessories, not recommended or supplied by the manufacturer.
30. The appliance (incl. cord and plug) may only be opened and/or repaired by properly authorized and qualied persons.
31. Only use this heater for its intended purpose and as described in this instruction manual. Failure to follow instructions 23,
24 and 25 may lead to damage, re and/or personal injuries. A failure to adhere to these rules also immediately nullies
the guarantee and vendor, importer and/or manufacturer do not take responsibility for any of the consequences!
32. Do not touch the appliance with wet hands.
33. Do not introduce any objects inside the appliance (for example needles).
FOR COUNTRIES SUBJECT TO EUROPEAN REGULATIONS
• Children aged between 3 and 8 years must only activate or deactivate the appliance, provided that it has been
positioned or installed in its normal operating position and that they are supervised or have received instructions
regarding the safe use of the appliance and are aware of the potential risks. Children aged between 3 and 8 years
must not connect, adjust or clean the appliance or carry out maintenance operations.
• WARNING: some parts of the appliance can overheat and cause burns. Pay particular attention in the presence of
children or vulnerable people.
• This appliance can be used by children aged 8 or over and by people whose physical, sensory or mental abilities are
reduced or who lack the necessary experience and knowledge, provided that these people are properly supervised
or have been instructed on the safe use of the appliance and related risks. Children must not play with the appliance.
Cleaning and maintenance operations must not be carried out by children left unattended.
DESCRIPTION
LOCATION AND CONNECTION
• Remove all packaging material and keep out of reach of children. After removing packaging, check the appliance for
damage or other signs that could indicate a fault/defect/malfunction. In case of doubt, do not use the appliance, but
contact your vendor for inspection or replacement.
• Choose a suitable location for the heater which is at least one meter away from any obstructions, walls or inammable
materials (see also safety instructions).
• Make sure a functioning heater is always placed on a solid, at and horizontal surface.
• Check if the control dial is set to 'OFF' (O).
• Fully extend the power cord and plug into a suitable 230V socket. To prevent the circuit overloading, check that no
other appliances are connected to the same group.
SET-UP AND OPERATION
• Turn the thermostat dial to maximum (clockwise as far as possible).
• Switch the heater on by turning the control dial to one of the following three positions:
I
Heating at half power (1000W)
II
Heating at full power (2000W)
The light at the front will turn on.
It is most economical to heat the space at full power, then to switch to half power to maintain the temperature.
2000W FAN HEATER
EN - 3
WWW.TECHLY.COM
1
CONTROL DIAL
2
THERMOSTAT DIAL
3
PILOT LIGHT
4
HANDLE
5
AIR OUTLET GRILL
6
AIR INTAKE GRILL (REVERSE SIDE)
2 1
4
6
3
5
Produktspezifikationen
| Marke: | Techly |
| Kategorie: | Heizung |
| Modell: | IC-HEAT001 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Techly IC-HEAT001 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Heizung Techly
26 Juli 2025
26 Juli 2025
Bedienungsanleitung Heizung
- Guardian
- Plieger
- Amantii
- Xiaomi
- Black And Decker
- Longvie
- Philco
- Infiniton
- Midea
- Adler
- Kenmore
- Tefal
- Heat Storm
- Ardes
- Profile
Neueste Bedienungsanleitung für -Kategorien-
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025