Techly IC-HEAT002 Bedienungsanleitung
Lies die bedienungsanleitung für Techly IC-HEAT002 (12 Seiten) kostenlos online; sie gehört zur Kategorie Heizung. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2 Bewertungen. Hast du eine Frage zu Techly IC-HEAT002 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/12
P/N: IC-HEAT002
8059018369953
SCAN
for MORE
PRODUCT INFO
2400W INDUSTRIAL
ELECTRIC FAN HEATER
Technical features
2400
WATT
PRACTICAL
HANDLE
ADJUSTABLE
EN
This product is only suitable for well insulated
spaces or occasional use.
IT
Questo prodotto è adatto solo per spazi
ben isolati o per un uso occasionale.
EN
User's Manual
IT
Manuale d’istruzione
WWW.TECHLY.COM
INTRODUCTION
Please read this instruction manual carefully before use and operate the heater properly. Keep the
user manual in a safe place for later reference.
The product is Class I appliance and must be connected to a properly earthed socket with
adequate current capacity (15A or more).
The appliance bears many merits such as small dimension with novelty, beautiful design and
optimized construction. Being used under different ambient temperature, the PTC heating element
adjusts the heat output automatically and safely, the warm air is sent out by the fan through forced
air circulation. The appliance heats up fast and uniformly. It also ensures safety use through double
protections (overheat protector and adjustable thermostat).
TECHNICAL SPECIFICATIONS
Before using the appliance, ensure that the power line is connected to a 15A fuse link.
The product can only be used as portable appliance.
The appliance is connected to the power supply through the power cord and plug.
PRODUCT DESCRIPTION AND USE
2400W INDUSTRIAL
ELECTRIC FAN HEATER
EN - 2
WWW.TECHLY.COM
SWITCH THERMOSTAT
Model Rated voltage/frequency Power
IC-HEAT002 AC220-240V, 50Hz 2400W
1
ENCLOSURE
2
AIR OUTLET
3
THERMOSTAT
4
SWITCH
4
2
3
1
CONTROL PANEL
SAFETY INSTRUCTIONS
It is important to read following instructions carefully before using the appliance:
WARNING: In order to avoid overheating, do not cover the heater.
1. Connect the plug only in an earthed socked with rated voltage.
2. Children of less than 3 years should be kept away unless continuously supervised.
3. The heating device shall not be installed below a socket-outlets.
4. Do not use outdoors or in humid place. Never use the heater in the bathroom, shower or near
a swimming pool etc.
5. Do not place the appliance on moving vehicles or some where easy to be tipped over.
6. When you don’t use the appliance for a long time, unplug the appliance. Don’t leave the heater
for a considerable amount of time when in use. Pull the plug straight out, never remove the
plug by pulling on the cord.
7. Use the appliance in places with good air ventilation, do not position it near a wall or corner.
8. When the appliance is in use, keep it far from combustible, explosive articles or explosive,
corrosive gas. Keep the heater far from curtain or places where the air inlet can easily be
blocked.
9. It is recommended that a separate circuit serving only this appliance be provided, keep the
power cord far enough from the hot air outlet.
10. Do not use this heater with a programmer, timer or any other device that switches the heater
on automatically.
11. The power coupler is waterproof when not in use. In order to prevent possible electric shock or
leakage current, never use the appliance with wet hand or operate the appliance when there is
water on the power cord.
12. If the supply cord is damaged, it must be replaced by the manufacturer or service agent or a
similarly qualied person in order to avoid a hazard.
13. In case the motor doesn’t turn after switching on of the power switch , stop using the appliance
and let it repaired by an approved electro technician before you use it again.
14. Heater is not located immediately below a socket-outlet.
15. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
2400W INDUSTRIAL
ELECTRIC FAN HEATER
EN - 3
WWW.TECHLY.COM
1
Heat Power setting: Cool/warm/hot wind for selection.
2
First turn the thermostat to the maximum position, switch the appliance on with
the biggest power input, when the desired room temperature is reached, turn the
thermostat anticlockwise till it turns off (a “click ” is heard). The thermostat then will
automatic turn on and off to keep the room temperature constant.
3
It’s normal when odor is blew off from the PTC heating element by the first use. It will
cease to happen when used again.
4
After the use, follow the below steps to operate the heater: turn off the thermostat
and switch (OFF position), unplug and let the appliance cool down in the air. When
the appliance cools down completely, put it in the packaging. Avoid to store the unit
before the heating element doesn’t cool down, it’s dangerous to store the hot unit.
Produktspezifikationen
| Marke: | Techly |
| Kategorie: | Heizung |
| Modell: | IC-HEAT002 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Techly IC-HEAT002 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Heizung Techly
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
Bedienungsanleitung Heizung
- Vornado
- AstralPool
- Bestron
- Anslut
- Enders
- Ariete
- Midea
- Delta
- Just Fire
- SuperFish
- Perel
- BeF Home
- Bosch
- Contura
- Melchioni
Neueste Bedienungsanleitung für -Kategorien-
27 Juli 2025
27 Juli 2025
27 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025