Texas Instruments LP3943 Bedienungsanleitung
Seiten 27 Nicht kategorisiert
Lies die Bedienungsanleitung für Texas Instruments LP3943 kostenlos online oder lade das PDF herunter. Diese Anleitung wurde 13 Mal aufgerufen. Frage zu diesem Modell? Stelle eine Frage
LP3943 16-Channel RGB, White-LED Driver
with Independent SMBUS/I
2
C String Control
1 Features
•Internal power-on reset
•Active low reset
•Internal precision oscillator
•Variable dim rates
(from 6.25ms to 1.6s; 160Hz to 0.625Hz)
•16 LED drivers (multiple programmable states:
ON, OFF, input, and dimming at a specified rate)
•16 open-drain outputs capable of driving up to
25mA per LED
2 Applications
•Customized flashing LED lights for cellular phones
•Portable applications
•Digital cameras
•Indicator lamps
•General purpose I/O expander
•Toys
3 Description
The LP3943 is an integrated device capable of
independently driving 16 LEDs. This device also
contains an internal precision oscillator that provides
all the necessary timing required for driving each
LED. Two prescaler registers, along with two PWM
registers, provide a versatile duty-cycle control.
The LP3943 contains the ability to dim LEDs in
SMBUS/I
2
C applications where it is required, to cut
down on bus traffic.
Traditionally, dimming LEDs using a serial shift
register such as 74LS594/5 requires a large amount
of traffic on the serial bus. The LP3943 instead
requires only the setup of the frequency and duty
cycle for each output pin; from then on, only a
single command from the host is required to turn
each individual open drain output to an ON or OFF
state, or to cycle a programmed frequency and duty
cycle. Maximum output sink current is 25mA per pin
and 200mA per package. Any ports not used for
controlling the LEDs can be used for general purpose
input/output expansion.
Device Information
(1)
PART NUMBERPACKAGEBODY SIZE (NOM)
LP3943WQFN (24)4.00mm × 4.00mm
(1)For all available packages, see the orderable addendum at
the end of the data sheet.
White LEDs
Blue LEDs
+5V
+5V
+5V
RGB
LED0
LED2
LED1
LED3
LED4
LED5
LED6
LED7
LED8
LED9
LED10
LED11
LED12
LED13
LED14
LED15
RESET
SCL
SDA
V
DD
5V
SDA
SCL
PORTx.D
Cell Phone Baseband
Controller/PController
A2
A1
A0
GND
SMBUS/I
2
C
Typical Application Circuit
LP3943
SNVS256E – NOVEMBER 2003 – REVISED OCTOBER 2024
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Produktspezifikationen
| Marke: | Texas Instruments |
| Kategorie: | Nicht kategorisiert |
| Modell: | LP3943 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Texas Instruments LP3943 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten