Thames & Kosmos Spy Labs: Invisible Tripwire Alarm Bedienungsanleitung

Lies die bedienungsanleitung für Thames & Kosmos Spy Labs: Invisible Tripwire Alarm (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 8 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 4.5 Bewertungen. Hast du eine Frage zu Thames & Kosmos Spy Labs: Invisible Tripwire Alarm oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

With this high-tech surveillance system, you can secure the entrance to your room

from intruders or protect a valuable item. If an intruder enters your room or a thief

tries to steal your property and passes through the light barrier, the loud alarm

signal is sure to scare them away!

WARNING! Not suitable for children under 3 years. Choking hazard — small parts

may be swallowed or inhaled.

Keep the packaging and instructions as they contain important information.

Safety warning: This surveillance system works with red LED light. It does not

produce real laser beams.

Do not look directly into the light beam, it could blind you!

How your security system works:

The tripwire projects an invisible beam of light between the transmitter and receiver.

If someone breaks through this beam of light, the alarm sounds and they are caught.

The surveillance system consists of three parts: the base station with two receivers

and two small devices, the transmitters. The receivers of the base station receive

light beams from both transmitters.

How to put the surveillance system into operation:

• Have an adult insert the batteries into each of the three devices (figure 2 + 3).

• Set the switch on the bottom of the base station to the “sun” symbol if your

surveillance system is in a bright room and to the “moon” symbol if it is being used in

a dark room (figure 3).

• Press the red main switch on top of the base station and the two LED indicator lights

next to it will light up (figure 1).

• Now set the on/off switch on the bottom of both transmitters to “ON” (figure 2).

• Place the three devices so that

each transmitter is directed at

a receiver on the base station.

The light tubes of the

transmitters and the receivers

on the base station are movable

(figure 1).

• When the light beam hits the

receiver, the corresponding

LED indicator will turn off

briefly. Three seconds later, a

short beep will sound. The LED

indicators will flash to indicate that the surveillance system is armed. If you are

having trouble finding the light beam, use a white sheet of paper to locate it.

• If the light beam is broken, the alarm sounds immediately and lasts for about six

seconds. You can also turn it off yourself by pressing the button on the base station.

If you press the button again, the light barrier will be armed once more.

TIPS!

• Place the three devices far away from white walls, windows, or bright lights.

• The base station should never be turned toward a window.

Figure 1: Base station and transmitters

Base station

Receiver

Receiver

LED indicatorLED indicator

Transmitter

Transmitter

LED light tubes

Invisible Tripwire Alarm

Quick Start:

1. Have an adult insert the

batteries (see back).

2. Set day or night mode on the

base station and press the

red main switch.

3. Activate transmitter.

4. Set up devices and adjust

them so that the light from

the transmitter hits the

receiver.

5. As soon as you hear a signal

from the receiver, the

connection is established.

The area is secure!

Main switch

Produktspezifikationen